COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2     [BIOM1= Total Dry Mass (g/m2)]      ( date set 1 )
    Column # 3     [BIOM1= Dry Mass <1000 um (g/m2)]      ( date set 1 )
    Column # 4     [BIOM1= Dry Mass 1000-2000 um (g/m2)]      ( date set 1 )
    Column # 5     [BIOM1= Dry Mass >2000 um (g/m2)]      ( date set 1 )

    Column # 6     [ DATE-YMD ]       Date Set = 2
    Column # 7     [CHLA1= Surface Chlorophyll (mg/m3)]      ( date set 2 )
    Column # 8     [CHLA1= Integrated Chlorophyll (mg/m3) from 0-20m]      ( date set 2 )
    Column # 9     [CHLA1= Integrated Chlorophyll (mg/m3) from 0-50m]      ( date set 2 )
    Column # 10     [CHLA1= Integrated Chlorophyll (mg/m3) from 0-bottom]      ( date set 2 )

    Column # 11     [ DATE-YMD ]       Date Set = 3
    Column # 12     [TEMP= Surface Temperature (C)]      ( date set 3 )
    Column # 13     [PSAL= Surface Salinity ()]      ( date set 3 )

    Column # 14     [ DATE-YMD ]       Date Set = 4
    Column # 15     [TEMP1= Average Temperature (C) from surface to bottom]      ( date set 4 )

    Column # 16     [ DATE-YMD ]       Date Set = 5
    Column # 17     [PSAL1= Average Salinity () from surface to bottom]      ( date set 5 )


DATA SORTED BY CATEGORY TYPES

    Temperatures Category
        Column # 12   [ TEMP= Surface Temperature (C) ]
        Column # 15   [ TEMP1= Average Temperature (C) from surface to bottom ]

    Salinities Category
        Column # 13   [ PSAL= Surface Salinity () ]
        Column # 17   [ PSAL1= Average Salinity () from surface to bottom ]

DATA SORTED BY GROUPING SETS:

    Category 4 Group # 1
        column # 15     [ TEMP1= Average Temperature (C) from surface to bottom ]

    Category 5 Group # 1
        column # 17     [ PSAL1= Average Salinity () from surface to bottom ]


DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1995 2019
DATES in Column 6 no problems detected 1980 2014
DATES in Column 11 no problems detected 1990 2016
DATES in Column 14 no problems detected 1990 2015
DATES in Column 16 no problems detected 1990 2015

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1995 2019 1 11 1 31
6 DATE-YMD DATE-YMD yes 1980 2014 1 12 1 31
11 DATE-YMD DATE-YMD yes 1990 2016 01 11 01 31
14 DATE-YMD DATE-YMD yes 1990 2015 01 11 15 15
16 DATE-YMD DATE-YMD yes 1990 2015 01 11 15 15


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_BIOM1= Total Dry Mass (g/m2) ] 		no problems detected 442 1.60000008E-02 64.3944016 442
( 100 %)		 261
( 59 %)
Column 3 :
[ 05_BIOM1= Dry Mass <1000 um (g/m2) ] 		no problems detected 442 8.00000038E-03 31.1119995 442
( 100 %)		 196
( 44 %)
Column 4 :
[ 06_BIOM1= Dry Mass 1000-2000 um (g/m2) ] 		no problems detected 442 8.00000038E-03 49.0432014 431
( 97 %)		 188
( 42 %)
Column 5 :
[ 07_BIOM1= Dry Mass >2000 um (g/m2) ] 		no problems detected 442 7.99999980E-04 20.8880005 288
( 65 %)		 38
( 8 %)
Column 7 :
[ 08_CHLA1= Surface Chlorophyll (mg/m3) ] 		no problems detected 841 1.00000005E-03 7.42600012 827
( 98 %)		 172
( 20 %)
Column 8 :
[ 09_CHLA1= Integrated Chlorophyll (mg/m3) from 0-20m ] 		no problems detected 837 3.00000014E-04 7.20419979 837
( 100 %)		 175
( 20 %)
Column 9 :
[ 10_CHLA1= Integrated Chlorophyll (mg/m3) from 0-50m ] 		no problems detected 837 3.99999990E-04 6.80950022 837
( 100 %)		 117
( 13 %)
Column 10 :
[ 11_CHLA1= Integrated Chlorophyll (mg/m3) from 0-bottom ] 		no problems detected 837 6.99999975E-04 4.81360006 837
( 100 %)		 50
( 5 %)
Column 12 :
[ 12_TEMP= Surface Temperature (C) ] 		no problems detected 2054 2.64590001 14.7069998 2054
( 100 %)		 2054
( 100 %)
Column 13 :
[ 13_PSAL= Surface Salinity () ] 		no problems detected 2050 18.6250992 35.3017998 2050
( 100 %)		 2050
( 100 %)
Column 15 :
[ 14_TEMP1= Average Temperature (C) from surface to bottom ] 		no problems detected 139 3.40219998 8.82499981 139
( 100 %)		 139
( 100 %)
Column 17 :
[ 15_PSAL1= Average Salinity () from surface to bottom ] 		no problems detected 139 34.3303986 35.1399994 139
( 100 %)		 139
( 100 %)

The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".