COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2    [ABDT1= Total Diatoms (#/L) at the surface]      ( date set 1 )

    Column # 3     [ DATE-YMD ]       Date Set = 2
    Column # 4    [ABDT1= Total Dinoflagellates (#/L) at the surface]      ( date set 2 )

    Column # 5     [ DATE-YMD ]       Date Set = 3
    Column # 6    [TEMP= Temperature (C) at the surface]      ( date set 3 )

    Column # 7     [ DATE-YMD ]       Date Set = 4
    Column # 8    [PSAL= Salinity () at the surface]      ( date set 4 )

    Column # 9     [ DATE-YMD ]       Date Set = 5
    Column # 10    [OTHR= Oxygen (ml/l) at the surface]      ( date set 5 )

    Column # 11     [ DATE-YMD ]       Date Set = 6
    Column # 12    [LOTH= NO3+NO2 (uM) at the surface]      ( date set 6 )

    Column # 13     [ DATE-YMD ]       Date Set = 7
    Column # 14    [LOTH= NH4 (uM) at the surface]      ( date set 7 )

    Column # 15     [ DATE-YMD ]       Date Set = 8
    Column # 16    [LOTH= PO4 (uM) at the surface]      ( date set 8 )

    Column # 17     [ DATE-YMD ]       Date Set = 9
    Column # 18    [LOTH= SiO4 (uM) at the surface]      ( date set 9 )

    Column # 19     [ DATE-YMD ]       Date Set = 10
    Column # 20    [CHLA= Chlorophyll (ug/L) at the surface]      ( date set 10 )


DATA SORTED BY CATEGORY TYPES

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatoms (#/L) at the surface ]
        Column # 4   [ ABDT1= Total Dinoflagellates (#/L) at the surface ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 12   [ LOTH= NO3+NO2 (uM) at the surface ]
        Column # 14   [ LOTH= NH4 (uM) at the surface ]
        Column # 16   [ LOTH= PO4 (uM) at the surface ]
        Column # 18   [ LOTH= SiO4 (uM) at the surface ]

    non-Log10 (linear) Miscellaenous Category
        Column # 10   [ OTHR= Oxygen (ml/l) at the surface ]

    Temperatures Category
        Column # 6   [ TEMP= Temperature (C) at the surface ]

    Salinities Category
        Column # 8   [ PSAL= Salinity () at the surface ]

    Chlorophyll/Pigments Category
        Column # 20   [ CHLA= Chlorophyll (ug/L) at the surface ]

DATA SORTED BY GROUPING SETS:

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatoms (#/L) at the surface ]
        column # 4     [ ABDT1= Total Dinoflagellates (#/L) at the surface ]


DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1987 2018
DATES in Column 3 no problems detected 1987 2018
DATES in Column 5 no problems detected 1987 2018
DATES in Column 7 no problems detected 1987 2018
DATES in Column 9 no problems detected 2000 2018
DATES in Column 11 no problems detected 2007 2018
DATES in Column 13 no problems detected 2007 2018
DATES in Column 15 no problems detected 2007 2018
DATES in Column 17 no problems detected 2007 2018
DATES in Column 19 no problems detected 1991 2018

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1987 2018 01 12 01 31
3 DATE-YMD DATE-YMD yes 1987 2018 01 12 01 31
5 DATE-YMD DATE-YMD yes 1987 2018 01 12 01 31
7 DATE-YMD DATE-YMD yes 1987 2018 01 12 01 31
9 DATE-YMD DATE-YMD yes 2000 2018 01 12 01 31
11 DATE-YMD DATE-YMD yes 2007 2018 01 12 01 31
13 DATE-YMD DATE-YMD yes 2007 2018 01 12 01 31
15 DATE-YMD DATE-YMD yes 2007 2018 01 12 01 31
17 DATE-YMD DATE-YMD yes 2007 2018 01 12 01 31
19 DATE-YMD DATE-YMD yes 1991 2018 01 12 01 31


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatoms (#/L) at the surface ] 		no problems detected 783 3400. 5915350. 783
( 100%)		 783
( 100%)
Column 4 :
[ 05_ABDT1= Total Dinoflagellates (#/L) at the surface ] 		no problems detected 775 100. 111600. 760
( 98%)		 760
( 98%)
Column 6 :
[ 06_TEMP= Temperature (C) at the surface ] 		no problems detected 1289 5.19999981 25.2000008 1289
( 100%)		 1289
( 100%)
Column 8 :
[ 07_PSAL= Salinity () at the surface ] 		no problems detected 1298 20.6000004 35.7999992 1298
( 100%)		 1298
( 100%)
Column 10 :
[ 08_OTHR= Oxygen (ml/l) at the surface ] 		no problems detected 336 5.88000011 10.5500002 336
( 100%)		 336
( 100%)
Column 12 :
[ 09_LOTH= NO3+NO2 (uM) at the surface ] 		no problems detected 146 0.200000003 37. 146
( 100%)		 99
( 67%)
Column 14 :
[ 10_LOTH= NH4 (uM) at the surface ] 		no problems detected 146 0.5 6.80000019 146
( 100%)		 98
( 67%)
Column 16 :
[ 11_LOTH= PO4 (uM) at the surface ] 		no problems detected 146 0.0199999996 0.310000002 146
( 100%)		 0
( 0%)
Column 18 :
[ 12_LOTH= SiO4 (uM) at the surface ] 		no problems detected 146 0.360000014 41. 146
( 100%)		 145
( 99%)
Column 20 :
[ 13_CHLA= Chlorophyll (ug/L) at the surface ] 		no problems detected 668 0.449999988 10.4899998 668
( 100%)		 572
( 85%)

The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".