COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-MDY ]       Date Set = 1
    Column # 2    [ABND= Total Zooplankton (#/m3)]      ( date set 1 )
    Column # 3    [BIOM= Total Dry Mass (mg/m3)]      ( date set 1 )

    Column # 4     [ DATE-MDY ]       Date Set = 2
    Column # 5    [TEMP= Temperature (C) from 0-10m]      ( date set 2 )
    Column # 6    [PSAL= Salinity () from 0-10m]      ( date set 2 )
    Column # 7    [OTHR= Dissolved Oxygen (ml/l) from 0-10m]      ( date set 2 )
    Column # 8    [CHLA= Chlorophyll-a (mg/m3) from 0-10m]      ( date set 2 )
    Column # 9    [LOTH1= NO3+NO2 (uM) from 0-10m]      ( date set 2 )
    Column # 10    [LOTH1= NO3 (uM) from 0-10m]      ( date set 2 )
    Column # 11    [LOTH1= NO2 (uM) from 0-10m]      ( date set 2 )
    Column # 12    [LOTH1= Ammonium (uM) from 0-10m]      ( date set 2 )
    Column # 13    [LOTH1= PO4 (uM) from 0-10m]      ( date set 2 )
    Column # 14    [LOTH1= SiO4 (uM) from 0-10m]      ( date set 2 )
    Column # 15    [LOTH= Primary Production (mg-C/m3/hr) from 0-10m]      ( date set 2 )


DATA SORTED BY CATEGORY TYPES

    Total Biomass Category
        Column # 3   [ BIOM= Total Dry Mass (mg/m3) ]

    Total/non-zero Abundance Category
        Column # 2   [ ABND= Total Zooplankton (#/m3) ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 9   [ LOTH1= NO3+NO2 (uM) from 0-10m ]
        Column # 10   [ LOTH1= NO3 (uM) from 0-10m ]
        Column # 11   [ LOTH1= NO2 (uM) from 0-10m ]
        Column # 12   [ LOTH1= Ammonium (uM) from 0-10m ]
        Column # 13   [ LOTH1= PO4 (uM) from 0-10m ]
        Column # 14   [ LOTH1= SiO4 (uM) from 0-10m ]
        Column # 15   [ LOTH= Primary Production (mg-C/m3/hr) from 0-10m ]

    non-Log10 (linear) Miscellaenous Category
        Column # 7   [ OTHR= Dissolved Oxygen (ml/l) from 0-10m ]

    Temperatures Category
        Column # 5   [ TEMP= Temperature (C) from 0-10m ]

    Salinities Category
        Column # 6   [ PSAL= Salinity () from 0-10m ]

    Chlorophyll/Pigments Category
        Column # 8   [ CHLA= Chlorophyll-a (mg/m3) from 0-10m ]

DATA SORTED BY GROUPING SETS:

    Category 9 Group # 1
        column # 9     [ LOTH1= NO3+NO2 (uM) from 0-10m ]
        column # 10     [ LOTH1= NO3 (uM) from 0-10m ]
        column # 11     [ LOTH1= NO2 (uM) from 0-10m ]
        column # 12     [ LOTH1= Ammonium (uM) from 0-10m ]
        column # 13     [ LOTH1= PO4 (uM) from 0-10m ]
        column # 14     [ LOTH1= SiO4 (uM) from 0-10m ]


DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1994 2013
DATES in Column 4 no problems detected 1994 2013

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-MDY DATE-MDY yes 1 12 1 31 1994 2013
4 DATE-MDY DATE-MDY yes 1 12 2 31 1994 2013


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_ABND= Total Zooplankton (#/m3) ] 		no problems detected 206 22. 93410. 206
( 100%)		 206
( 100%)
Column 3 :
[ 05_BIOM= Total Dry Mass (mg/m3) ] 		no problems detected 208 0.460000008 573.299988 208
( 100%)		 204
( 98%)
Column 5 :
[ 06_TEMP= Temperature (C) from 0-10m ] 		no problems detected 594 11.6850004 20.2276001 594
( 100%)		 594
( 100%)
Column 6 :
[ 07_PSAL= Salinity () from 0-10m ] 		no problems detected 593 26.0613995 36.0985985 593
( 100%)		 593
( 100%)
Column 7 :
[08_OTHR= Dissolved Oxygen (ml/l) from 0-10m ] 		There is/are 3 count WARNING(S)!

All/most of your values are EMPTY (missing).
This variable will be ignored!

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  0 9999999. -9999999. 0
    ( -2147483648%)    		 0
    ( -2147483648%)
    Column 8 :
    [ 09_CHLA= Chlorophyll-a (mg/m3) from 0-10m ]     		no problems detected 468 0.0199999996 12.3000002 468
    ( 100%)    		 274
    ( 58%)
    Column 9 :
    [ 10_LOTH1= NO3+NO2 (uM) from 0-10m ]     		no problems detected 37 0.00999999978 11.0200005 34
    ( 91%)    		 15
    ( 40%)
    Column 10 :
    [ 11_LOTH1= NO3 (uM) from 0-10m ]     		no problems detected 389 0.0199999996 21.7999992 389
    ( 100%)    		 209
    ( 53%)
    Column 11 :
    [ 12_LOTH1= NO2 (uM) from 0-10m ]     		no problems detected 384 0.00999999978 1.55999994 381
    ( 99%)    		 10
    ( 2%)
    Column 12 :
    [ 13_LOTH1= Ammonium (uM) from 0-10m ]     		no problems detected 172 0.0599999987 1.96000004 172
    ( 100%)    		 62
    ( 36%)
    Column 13 :
    [ 14_LOTH1= PO4 (uM) from 0-10m ]     		no problems detected 423 0.00999999978 0.899999976 417
    ( 98%)    		 0
    ( 0%)
    Column 14 :
    [ 15_LOTH1= SiO4 (uM) from 0-10m ]     		no problems detected 409 0.0500000007 25.7000008 409
    ( 100%)    		 238
    ( 58%)
    Column 15 :
    [16_LOTH= Primary Production (mg-C/m3/hr) from 0-10m ]     		There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  0 9999999. -9999999. 0
    ( -2147483648%)    		 0
    ( -2147483648%)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".