COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2    [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 )
    Column # 3    [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 4    [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 )
    Column # 5    [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 )
    Column # 6    [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 )
    Column # 7    [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 )
    Column # 8    [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 )
    Column # 9    [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 )
    Column # 10    [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 11    [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 )
    Column # 12    [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 )
    Column # 13    [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 )
    Column # 14    [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 )
    Column # 15    [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 )

    Column # 16     [ DATE-YMD ]       Date Set = 2
    Column # 17    [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 18    [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 19    [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 20    [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 )
    Column # 21    [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 22    [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 23    [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 24    [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 25    [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 26    [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 27    [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 )
    Column # 28    [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 29    [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 )
    Column # 30    [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 )

    Column # 31     [ DATE-YMD ]       Date Set = 3
    Column # 32    [TEMP= Temperature ( C )]      ( date set 3 )
    Column # 33    [PSAL= Salinity (PSS)]      ( date set 3 )
    Column # 34    [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 )
    Column # 35    [OTHR= Oxygen (mg/L)]      ( date set 3 )
    Column # 36    [LOTH= NO3NO2 (uM)]      ( date set 3 )
    Column # 37    [LOTH= NH4 (uM)]      ( date set 3 )
    Column # 38    [LOTH= Nitrite (uM)]      ( date set 3 )
    Column # 39    [LOTH= Nitrate (uM)]      ( date set 3 )
    Column # 40    [LOTH= Phosphate (uM)]      ( date set 3 )
    Column # 41    [LOTH= Silicate (uM)]      ( date set 3 )
    Column # 42    [LOTH= Total Nitrogen (uM)]      ( date set 3 )
    Column # 43    [LOTH= Total Phosphorus (uM)]      ( date set 3 )
    Column # 44    [OTHR= Suspended Solids (mg/L)]      ( date set 3 )
    Column # 45    [LOTH= Turbidity (FTU)]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    Total Biomass Category
        Column # 17   [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        Column # 18   [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        Column # 19   [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        Column # 20   [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        Column # 21   [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        Column # 22   [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        Column # 23   [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        Column # 24   [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        Column # 25   [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        Column # 26   [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        Column # 27   [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        Column # 28   [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        Column # 29   [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        Column # 30   [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]
        Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 36   [ LOTH= NO3NO2 (uM) ]
        Column # 37   [ LOTH= NH4 (uM) ]
        Column # 38   [ LOTH= Nitrite (uM) ]
        Column # 39   [ LOTH= Nitrate (uM) ]
        Column # 40   [ LOTH= Phosphate (uM) ]
        Column # 41   [ LOTH= Silicate (uM) ]
        Column # 42   [ LOTH= Total Nitrogen (uM) ]
        Column # 43   [ LOTH= Total Phosphorus (uM) ]
        Column # 45   [ LOTH= Turbidity (FTU) ]

    non-Log10 (linear) Miscellaenous Category
        Column # 35   [ OTHR= Oxygen (mg/L) ]
        Column # 44   [ OTHR= Suspended Solids (mg/L) ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature ( C ) ]

    Salinities Category
        Column # 33   [ PSAL= Salinity (PSS) ]

    Chlorophyll/Pigments Category
        Column # 34   [ CHLA= Chlorophyll-a (ug/L) ]

DATA SORTED BY GROUPING SETS:

    Category 1 Group # 2
        column # 17     [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        column # 18     [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        column # 19     [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        column # 20     [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        column # 21     [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        column # 22     [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        column # 23     [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        column # 24     [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        column # 25     [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        column # 26     [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        column # 27     [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        column # 28     [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        column # 29     [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        column # 30     [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]
        column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ]



DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1989 2009
DATES in Column 16 no problems detected 1989 2009
DATES in Column 31 no problems detected 1982 2012

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1989 2009 01 12 01 31
16 DATE-YMD DATE-YMD yes 1989 2009 01 12 01 31
31 DATE-YMD DATE-YMD yes 1982 2012 01 12 01 31



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ]
no problems detected 379 60. 19115650. 379
( 100%)
379
( 100%)
Column 3 :
[ 05_ABDT1= Total Dinophyceae (#/l) at the surface ]
no problems detected 369 26.6667004 1455666.62 369
( 100%)
369
( 100%)
Column 4 :
[ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ]
no problems detected 353 3600. 20066060. 353
( 100%)
353
( 100%)
Column 5 :
[ 07_ABDT1= Total Litostomatea (#/l) at the surface ]
no problems detected 277 40. 55000. 277
( 100%)
277
( 100%)
Column 6 :
[ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ]
no problems detected 187 20. 1323862.25 187
( 100%)
187
( 100%)
Column 7 :
[ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ]
no problems detected 28 20. 65041224. 28
( 100%)
28
( 100%)
Column 8 :
[ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ]
no problems detected 65 20. 183400. 65
( 100%)
65
( 100%)
Column 9 :
[ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
no problems detected 67 1201.19897 3702841.5 67
( 100%)
67
( 100%)
Column 10 :
[ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ]
no problems detected 112 2195.74023 2845300. 112
( 100%)
112
( 100%)
Column 11 :
[ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ]
no problems detected 92 20. 7463000. 92
( 100%)
92
( 100%)
Column 12 :
[14_ABDT1= Total Nanoplankton (#/l) at the surface ]
There is/are 3 count WARNING(S)!

All/most of your values are EMPTY (missing).
This variable will be ignored!


Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 13 :
    [ 15_ABDT1= Total Raphidophyceae (#/l) at the surface ]
    no problems detected 26 200. 666318.625 26
    ( 100%)
    26
    ( 100%)
    Column 14 :
    [16_ABDT1= Total Spirotrichea (#/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 15 :
    [ 17_ABDT1= Total Unidentified (#/l) at the surface ]
    no problems detected 386 23750. 11963150. 386
    ( 100%)
    386
    ( 100%)
    Column 17 :
    [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ]
    no problems detected 379 0.0046000001 363.574188 379
    ( 100%)
    273
    ( 72%)
    Column 18 :
    [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ]
    no problems detected 369 0.00710000005 298.30249 369
    ( 100%)
    265
    ( 71%)
    Column 19 :
    [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ]
    no problems detected 352 0.0223999992 32.5821991 352
    ( 100%)
    138
    ( 39%)
    Column 20 :
    [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ]
    no problems detected 277 0.0110999998 110.090698 277
    ( 100%)
    125
    ( 45%)
    Column 21 :
    [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ]
    no problems detected 186 0.0092000002 91.6751022 186
    ( 100%)
    54
    ( 29%)
    Column 22 :
    [23_BIOM2= Total Chlorophyceae (ug/l) at the surface ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 24 0.00159999996 9.59140015 24
    ( 100%)
    4
    ( 16%)
    Column 23 :
    [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ]
    no problems detected 65 0.00219999999 6.76370001 65
    ( 100%)
    6
    ( 9%)
    Column 24 :
    [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
    no problems detected 67 0.0131999999 21.4692001 67
    ( 100%)
    35
    ( 52%)
    Column 25 :
    [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ]
    no problems detected 112 0.0153999999 36.8578987 112
    ( 100%)
    47
    ( 41%)
    Column 26 :
    [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ]
    no problems detected 90 0.000699999975 1595.58936 90
    ( 100%)
    26
    ( 28%)
    Column 27 :
    [28_BIOM2= Total Nanoplankton (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 28 :
    [ 29_BIOM2= Total Raphidophyceae (ug/l) at the surface ]
    no problems detected 26 0.0170000009 44.4294014 26
    ( 100%)
    12
    ( 46%)
    Column 29 :
    [30_BIOM2= Total Spirotrichea (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 30 :
    [ 31_BIOM2= Total Unidentified (ug/l) at the surface ]
    no problems detected 385 0.148599997 72.5842972 385
    ( 100%)
    332
    ( 86%)
    Column 32 :
    [ 32_TEMP= Temperature ( C ) ]
    no problems detected 590 -0.900600016 23.4468994 580
    ( 98%)
    571
    ( 96%)
    Column 33 :
    [ 33_PSAL= Salinity (PSS) ]
    no problems detected 590 12.8916998 30.9386997 590
    ( 100%)
    590
    ( 100%)
    Column 34 :
    [ 34_CHLA= Chlorophyll-a (ug/L) ]
    no problems detected 523 0.224000007 90. 523
    ( 100%)
    453
    ( 86%)
    Column 35 :
    [ 35_OTHR= Oxygen (mg/L) ]
    no problems detected 579 3.04850006 23.3418999 579
    ( 100%)
    579
    ( 100%)
    Column 36 :
    [ 36_LOTH= NO3NO2 (uM) ]
    no problems detected 550 0.107100002 80.4356995 550
    ( 100%)
    292
    ( 53%)
    Column 37 :
    [ 37_LOTH= NH4 (uM) ]
    no problems detected 87 0.214300007 10.7143002 87
    ( 100%)
    31
    ( 35%)
    Column 38 :
    [38_LOTH= Nitrite (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 39 :
    [39_LOTH= Nitrate (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 40 :
    [ 40_LOTH= Phosphate (uM) ]
    no problems detected 536 0.0322999991 5.16130018 536
    ( 100%)
    99
    ( 18%)
    Column 41 :
    [ 41_LOTH= Silicate (uM) ]
    no problems detected 533 0.0714000016 233.928604 532
    ( 99%)
    518
    ( 97%)
    Column 42 :
    [ 42_LOTH= Total Nitrogen (uM) ]
    no problems detected 551 7.85710001 171.428604 551
    ( 100%)
    551
    ( 100%)
    Column 43 :
    [ 43_LOTH= Total Phosphorus (uM) ]
    no problems detected 536 0.128999993 7.41940022 536
    ( 100%)
    356
    ( 66%)
    Column 44 :
    [44_OTHR= Suspended Solids (mg/L) ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 45 :
    [ 45_LOTH= Turbidity (FTU) ]
    no problems detected 274 5.875 3132.72217 274
    ( 100%)
    274
    ( 100%)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".