COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2    [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 )
    Column # 3    [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 4    [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 )
    Column # 5    [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 )
    Column # 6    [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 )
    Column # 7    [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 )
    Column # 8    [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 )
    Column # 9    [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 )
    Column # 10    [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 11    [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 )
    Column # 12    [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 )
    Column # 13    [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 )
    Column # 14    [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 )
    Column # 15    [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 )

    Column # 16     [ DATE-YMD ]       Date Set = 2
    Column # 17    [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 18    [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 19    [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 20    [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 )
    Column # 21    [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 22    [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 23    [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 24    [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 25    [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 26    [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 27    [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 )
    Column # 28    [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 29    [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 )
    Column # 30    [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 )

    Column # 31     [ DATE-YMD ]       Date Set = 3
    Column # 32    [TEMP= Temperature ( C )]      ( date set 3 )
    Column # 33    [PSAL= Salinity (PSS)]      ( date set 3 )
    Column # 34    [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 )
    Column # 35    [OTHR= Oxygen (mg/L)]      ( date set 3 )
    Column # 36    [LOTH= NO3NO2 (uM)]      ( date set 3 )
    Column # 37    [LOTH= NH4 (uM)]      ( date set 3 )
    Column # 38    [LOTH= Nitrite (uM)]      ( date set 3 )
    Column # 39    [LOTH= Nitrate (uM)]      ( date set 3 )
    Column # 40    [LOTH= Phosphate (uM)]      ( date set 3 )
    Column # 41    [LOTH= Silicate (uM)]      ( date set 3 )
    Column # 42    [LOTH= Total Nitrogen (uM)]      ( date set 3 )
    Column # 43    [LOTH= Total Phosphorus (uM)]      ( date set 3 )
    Column # 44    [OTHR= Suspended Solids (mg/L)]      ( date set 3 )
    Column # 45    [LOTH= Turbidity (FTU)]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    Total Biomass Category
        Column # 17   [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        Column # 18   [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        Column # 19   [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        Column # 20   [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        Column # 21   [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        Column # 22   [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        Column # 23   [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        Column # 24   [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        Column # 25   [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        Column # 26   [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        Column # 27   [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        Column # 28   [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        Column # 29   [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        Column # 30   [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]
        Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 36   [ LOTH= NO3NO2 (uM) ]
        Column # 37   [ LOTH= NH4 (uM) ]
        Column # 38   [ LOTH= Nitrite (uM) ]
        Column # 39   [ LOTH= Nitrate (uM) ]
        Column # 40   [ LOTH= Phosphate (uM) ]
        Column # 41   [ LOTH= Silicate (uM) ]
        Column # 42   [ LOTH= Total Nitrogen (uM) ]
        Column # 43   [ LOTH= Total Phosphorus (uM) ]
        Column # 45   [ LOTH= Turbidity (FTU) ]

    non-Log10 (linear) Miscellaenous Category
        Column # 35   [ OTHR= Oxygen (mg/L) ]
        Column # 44   [ OTHR= Suspended Solids (mg/L) ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature ( C ) ]

    Salinities Category
        Column # 33   [ PSAL= Salinity (PSS) ]

    Chlorophyll/Pigments Category
        Column # 34   [ CHLA= Chlorophyll-a (ug/L) ]

DATA SORTED BY GROUPING SETS:

    Category 1 Group # 2
        column # 17     [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        column # 18     [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        column # 19     [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        column # 20     [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        column # 21     [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        column # 22     [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        column # 23     [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        column # 24     [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        column # 25     [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        column # 26     [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        column # 27     [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        column # 28     [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        column # 29     [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        column # 30     [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]
        column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ]



DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1983 2009
DATES in Column 16 no problems detected 1983 2009
DATES in Column 31 no problems detected 1982 2012

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1983 2009 01 12 01 31
16 DATE-YMD DATE-YMD yes 1983 2009 01 12 01 31
31 DATE-YMD DATE-YMD yes 1982 2012 01 12 01 31



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ]
no problems detected 551 100. 25053260. 551
( 100%)
551
( 100%)
Column 3 :
[ 05_ABDT1= Total Dinophyceae (#/l) at the surface ]
no problems detected 544 100. 600000. 544
( 100%)
544
( 100%)
Column 4 :
[ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ]
no problems detected 501 90. 6636625. 501
( 100%)
501
( 100%)
Column 5 :
[ 07_ABDT1= Total Litostomatea (#/l) at the surface ]
no problems detected 385 100. 8000000. 385
( 100%)
385
( 100%)
Column 6 :
[ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ]
no problems detected 207 30. 1659156.25 207
( 100%)
207
( 100%)
Column 7 :
[ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ]
no problems detected 18 100. 8216774. 18
( 100%)
18
( 100%)
Column 8 :
[ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ]
no problems detected 71 100. 388770624. 71
( 100%)
71
( 100%)
Column 9 :
[ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
no problems detected 359 140. 4844736. 359
( 100%)
359
( 100%)
Column 10 :
[ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ]
no problems detected 257 60. 15927900. 257
( 100%)
257
( 100%)
Column 11 :
[ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ]
no problems detected 126 100. 585350.312 126
( 100%)
126
( 100%)
Column 12 :
[14_ABDT1= Total Nanoplankton (#/l) at the surface ]
There is/are 3 count WARNING(S)!

All/most of your values are EMPTY (missing).
This variable will be ignored!


Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 13 :
    [ 15_ABDT1= Total Raphidophyceae (#/l) at the surface ]
    no problems detected 24 199.996002 1228500. 24
    ( 100%)
    24
    ( 100%)
    Column 14 :
    [16_ABDT1= Total Spirotrichea (#/l) at the surface ]
    There is/are 1 count WARNING(S)!
    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 12 100. 59000. 12
    ( 100%)
    12
    ( 100%)
    Column 15 :
    [ 17_ABDT1= Total Unidentified (#/l) at the surface ]
    no problems detected 499 0.0333000012 24776734. 499
    ( 100%)
    490
    ( 98%)
    Column 17 :
    [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ]
    no problems detected 517 0.0218000002 924.675903 517
    ( 100%)
    365
    ( 70%)
    Column 18 :
    [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ]
    no problems detected 464 0.0124000004 399.339386 464
    ( 100%)
    230
    ( 49%)
    Column 19 :
    [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ]
    no problems detected 491 0.0124000004 36.2854004 491
    ( 100%)
    245
    ( 49%)
    Column 20 :
    [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ]
    no problems detected 380 0.0126999998 69.9957962 380
    ( 100%)
    145
    ( 38%)
    Column 21 :
    [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ]
    no problems detected 198 0.00879999995 59.8204002 198
    ( 100%)
    67
    ( 33%)
    Column 22 :
    [23_BIOM2= Total Chlorophyceae (ug/l) at the surface ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 13 0.0037 4.2038002 13
    ( 100%)
    2
    ( 15%)
    Column 23 :
    [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ]
    no problems detected 80 0.000699999975 42.764801 80
    ( 100%)
    25
    ( 31%)
    Column 24 :
    [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
    no problems detected 356 0.000699999975 22.7763996 356
    ( 100%)
    135
    ( 37%)
    Column 25 :
    [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ]
    no problems detected 253 0.000199999995 82.2585983 253
    ( 100%)
    52
    ( 20%)
    Column 26 :
    [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ]
    no problems detected 119 0.00219999999 53.9420013 119
    ( 100%)
    6
    ( 5%)
    Column 27 :
    [28_BIOM2= Total Nanoplankton (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 28 :
    [ 29_BIOM2= Total Raphidophyceae (ug/l) at the surface ]
    no problems detected 24 0.023 78.9207001 24
    ( 100%)
    15
    ( 62%)
    Column 29 :
    [30_BIOM2= Total Spirotrichea (ug/l) at the surface ]
    There is/are 1 count WARNING(S)!
    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 12 0.0287999995 11.6560001 12
    ( 100%)
    6
    ( 50%)
    Column 30 :
    [ 31_BIOM2= Total Unidentified (ug/l) at the surface ]
    no problems detected 488 0.000300000014 92.5 466
    ( 95%)
    256
    ( 52%)
    Column 32 :
    [ 32_TEMP= Temperature ( C ) ]
    no problems detected 854 -1.52939999 22.5461998 837
    ( 98%)
    827
    ( 96%)
    Column 33 :
    [ 33_PSAL= Salinity (PSS) ]
    no problems detected 855 25.8999996 33.6666985 855
    ( 100%)
    855
    ( 100%)
    Column 34 :
    [ 34_CHLA= Chlorophyll-a (ug/L) ]
    no problems detected 729 0.340000004 130. 729
    ( 100%)
    695
    ( 95%)
    Column 35 :
    [ 35_OTHR= Oxygen (mg/L) ]
    no problems detected 843 6.1500001 14.75 843
    ( 100%)
    843
    ( 100%)
    Column 36 :
    [ 36_LOTH= NO3NO2 (uM) ]
    no problems detected 805 0.0714000016 78.5714035 805
    ( 100%)
    621
    ( 77%)
    Column 37 :
    [ 37_LOTH= NH4 (uM) ]
    no problems detected 804 0.0714000016 25.7143002 804
    ( 100%)
    489
    ( 60%)
    Column 38 :
    [38_LOTH= Nitrite (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 39 :
    [39_LOTH= Nitrate (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 40 :
    [ 40_LOTH= Phosphate (uM) ]
    no problems detected 805 0.0322999991 2.06450009 805
    ( 100%)
    84
    ( 10%)
    Column 41 :
    [ 41_LOTH= Silicate (uM) ]
    no problems detected 731 0.0714000016 39.2857018 731
    ( 100%)
    560
    ( 76%)
    Column 42 :
    [ 42_LOTH= Total Nitrogen (uM) ]
    no problems detected 805 7.85710001 221.428604 805
    ( 100%)
    805
    ( 100%)
    Column 43 :
    [ 43_LOTH= Total Phosphorus (uM) ]
    no problems detected 804 0.248400003 9.0323 804
    ( 100%)
    490
    ( 60%)
    Column 44 :
    [ 44_OTHR= Suspended Solids (mg/L) ]
    no problems detected 684 0.400000006 300. 684
    ( 100%)
    674
    ( 98%)
    Column 45 :
    [45_LOTH= Turbidity (FTU) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".