COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-MDY ]       Date Set = 1
    Column # 2     [BIOM= Total Wet Mass (mg/m3)]      ( date set 1 )
    Column # 3     [BIOM= Total Copepod Biomass (mg/m3)]      ( date set 1 )
    Column # 4     [OTHR= Relative Copepod Biomass (%)]      ( date set 1 )

    Column # 5     [ DATE-YMD ]       Date Set = 2
    Column # 6     [TEMP= Temperature (C) in the upper 5 meters]      ( date set 2 )
    Column # 7     [PSAL= Salinity () in the upper 5 meters]      ( date set 2 )
    Column # 8     [OTHR= Oxygen (ml/l) in the upper 5 meters]      ( date set 2 )

    Column # 9     [ DATE-YMD ]       Date Set = 3
    Column # 10     [TEMP= Temperature (C) in the upper 10 meters]      ( date set 3 )
    Column # 11     [PSAL= Salinity () in the upper 10 meters]      ( date set 3 )
    Column # 12     [OTHR= Oxygen (ml/l) in the upper 10 meters]      ( date set 3 )
    Column # 13     [LOTH= Silicate (uM) in the upper 10 meters]      ( date set 3 )
    Column # 14     [LOTH= Phosphate (uM) in the upper 10 meters]      ( date set 3 )
    Column # 15     [LOTH= Nitrate (uM) in the upper 10 meters]      ( date set 3 )
    Column # 16     [CHLA= Chlorophyll (mg/m3) in the upper 10 meters]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    non-Log10 (linear) Miscellaenous Category
        Column # 4   [ OTHR= Relative Copepod Biomass (%) ]
        Column # 8   [ OTHR= Oxygen (ml/l) in the upper 5 meters ]
        Column # 12   [ OTHR= Oxygen (ml/l) in the upper 10 meters ]

    Temperatures Category
        Column # 6   [ TEMP= Temperature (C) in the upper 5 meters ]
        Column # 10   [ TEMP= Temperature (C) in the upper 10 meters ]

    Salinities Category
        Column # 7   [ PSAL= Salinity () in the upper 5 meters ]
        Column # 11   [ PSAL= Salinity () in the upper 10 meters ]



DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1995 2013
DATES in Column 5 no problems detected 1968 1970
DATES in Column 9 no problems detected 1956 1967

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-MDY DATE-MDY yes 2 9 1 31 1995 2013
5 DATE-YMD DATE-YMD yes 1968 1970 01 12 01 31
9 DATE-YMD DATE-YMD yes 1956 1967 01 12 01 31


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_BIOM= Total Wet Mass (mg/m3) ] 		no problems detected 188 0.488499999 466.672791 188
( 100 %)		 184
( 97 %)
Column 3 :
[ 05_BIOM= Total Copepod Biomass (mg/m3) ] 		no problems detected 188 0.203799993 301.309601 188
( 100 %)		 173
( 92 %)
Column 4 :
[06_OTHR= Relative Copepod Biomass (%) ] 		There is/are 1 count WARNING(S)!

Some of your values are zero or "one".

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  188 9.99999978E-03 0.939999998 188
    ( 100 %)    		 0
    ( 0 %)
    Column 6 :
    [ 07_TEMP= Temperature (C) in the upper 5 meters ]     		no problems detected 308 4.13000011 13.7799997 308
    ( 100 %)    		 308
    ( 100 %)
    Column 7 :
    [ 08_PSAL= Salinity () in the upper 5 meters ]     		no problems detected 308 32.3899994 32.7299995 308
    ( 100 %)    		 308
    ( 100 %)
    Column 8 :
    [09_OTHR= Oxygen (ml/l) in the upper 5 meters ]     		There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  0 9999999.00 -9999999.00 0
    ( -2147483648 %)    		 0
    ( -2147483648 %)
    Column 10 :
    [ 10_TEMP= Temperature (C) in the upper 10 meters ]     		no problems detected 1191 4.30000019 14.8000002 1191
    ( 100 %)    		 1191
    ( 100 %)
    Column 11 :
    [ 11_PSAL= Salinity () in the upper 10 meters ]     		no problems detected 1268 32.3549995 33.1199989 1268
    ( 100 %)    		 1268
    ( 100 %)
    Column 12 :
    [ 12_OTHR= Oxygen (ml/l) in the upper 10 meters ]     		no problems detected 964 5.69000006 8.53999996 964
    ( 100 %)    		 964
    ( 100 %)
    Column 13 :
    [ 13_LOTH= Silicate (uM) in the upper 10 meters ]     		no problems detected 333 8.60000038 34.0999985 333
    ( 100 %)    		 333
    ( 100 %)
    Column 14 :
    [ 14_LOTH= Phosphate (uM) in the upper 10 meters ]     		no problems detected 228 0.649999976 3.50999999 228
    ( 100 %)    		 217
    ( 95 %)
    Column 15 :
    [ 15_LOTH= Nitrate (uM) in the upper 10 meters ]     		no problems detected 77 2.00000000 22.0000000 77
    ( 100 %)    		 77
    ( 100 %)
    Column 16 :
    [16_CHLA= Chlorophyll (mg/m3) in the upper 10 meters ]     		There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  249 0.119999997 1.79999995 249
    ( 100 %)    		 3
    ( 1 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".