COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2     [BIOM1= Total Dry Mass (g/m2)]      ( date set 1 )
    Column # 3     [ABDT= ACAlong (g/m2)]      ( date set 1 )
    Column # 4     [ABDT= CALma (g/m2)]      ( date set 1 )
    Column # 5     [ABDT= CALpa (g/m2)]      ( date set 1 )
    Column # 6     [ABDT= CHAETsouth (g/m2)]      ( date set 1 )
    Column # 7     [ABDT= CIRRIPED (g/m2)]      ( date set 1 )
    Column # 8     [ABDT= CONCHOEC (g/m2)]      ( date set 1 )
    Column # 9     [ABDT= EUAbu (g/m2)]      ( date set 1 )
    Column # 10     [ABDT= EUAca (g/m2)]      ( date set 1 )
    Column # 11     [ABDT= EUCHAETA (g/m2)]      ( date set 1 )
    Column # 12     [ABDT= EUK (g/m2)]      ( date set 1 )
    Column # 13     [ABDT= EuphEGGS (g/m2)]      ( date set 1 )
    Column # 14     [ABDT= EUPHjuvs (g/m2)]      ( date set 1 )
    Column # 15     [ABDT= EUPpa (g/m2)]      ( date set 1 )
    Column # 16     [ABDT= LARVACEA (g/m2)]      ( date set 1 )
    Column # 17     [ABDT= LIMAC (g/m2)]      ( date set 1 )
    Column # 18     [ABDT= MEDUS (g/m2)]      ( date set 1 )
    Column # 19     [ABDT= MESte (g/m2)]      ( date set 1 )
    Column # 20     [ABDT= METpa (g/m2)]      ( date set 1 )
    Column # 21     [ABDT= MICROCAL (g/m2)]      ( date set 1 )
    Column # 22     [ABDT= MOLUSClar (g/m2)]      ( date set 1 )
    Column # 23     [ABDT= NEOcr (g/m2)]      ( date set 1 )
    Column # 24     [ABDT= OITat (g/m2)]      ( date set 1 )
    Column # 25     [ABDT= OITsi (g/m2)]      ( date set 1 )
    Column # 26     [ABDT= PARACAL (g/m2)]      ( date set 1 )
    Column # 27     [ABDT= PATel (g/m2)]      ( date set 1 )
    Column # 28     [ABDT= PSEUDOCAL (g/m2)]      ( date set 1 )
    Column # 29     [ABDT= PSSsc (g/m2)]      ( date set 1 )
    Column # 30     [ABDT= RACan (g/m2)]      ( date set 1 )
    Column # 31     [ABDT= Remainder (g/m2)]      ( date set 1 )
    Column # 32     [ABDT= SALPS (g/m2)]      ( date set 1 )
    Column # 33     [ABDT= SCOmi (g/m2)]      ( date set 1 )
    Column # 34     [ABDT= SIPHON (g/m2)]      ( date set 1 )
    Column # 35     [ABDT= THEMISTO (g/m2)]      ( date set 1 )
    Column # 36     [ABDT= THYin (g/m2)]      ( date set 1 )
    Column # 37     [ABDT= THYsp (g/m2)]      ( date set 1 )
    Column # 38     [ABDT= TOMOP (g/m2)]      ( date set 1 )


DATA SORTED BY CATEGORY TYPES

    Abundance (with zeros) Category
        Column # 3   [ ABDT= ACAlong (g/m2) ]
        Column # 4   [ ABDT= CALma (g/m2) ]
        Column # 5   [ ABDT= CALpa (g/m2) ]
        Column # 6   [ ABDT= CHAETsouth (g/m2) ]
        Column # 7   [ ABDT= CIRRIPED (g/m2) ]
        Column # 8   [ ABDT= CONCHOEC (g/m2) ]
        Column # 9   [ ABDT= EUAbu (g/m2) ]
        Column # 10   [ ABDT= EUAca (g/m2) ]
        Column # 11   [ ABDT= EUCHAETA (g/m2) ]
        Column # 12   [ ABDT= EUK (g/m2) ]
        Column # 13   [ ABDT= EuphEGGS (g/m2) ]
        Column # 14   [ ABDT= EUPHjuvs (g/m2) ]
        Column # 15   [ ABDT= EUPpa (g/m2) ]
        Column # 16   [ ABDT= LARVACEA (g/m2) ]
        Column # 17   [ ABDT= LIMAC (g/m2) ]
        Column # 18   [ ABDT= MEDUS (g/m2) ]
        Column # 19   [ ABDT= MESte (g/m2) ]
        Column # 20   [ ABDT= METpa (g/m2) ]
        Column # 21   [ ABDT= MICROCAL (g/m2) ]
        Column # 22   [ ABDT= MOLUSClar (g/m2) ]
        Column # 23   [ ABDT= NEOcr (g/m2) ]
        Column # 24   [ ABDT= OITat (g/m2) ]
        Column # 25   [ ABDT= OITsi (g/m2) ]
        Column # 26   [ ABDT= PARACAL (g/m2) ]
        Column # 27   [ ABDT= PATel (g/m2) ]
        Column # 28   [ ABDT= PSEUDOCAL (g/m2) ]
        Column # 29   [ ABDT= PSSsc (g/m2) ]
        Column # 30   [ ABDT= RACan (g/m2) ]
        Column # 31   [ ABDT= Remainder (g/m2) ]
        Column # 32   [ ABDT= SALPS (g/m2) ]
        Column # 33   [ ABDT= SCOmi (g/m2) ]
        Column # 34   [ ABDT= SIPHON (g/m2) ]
        Column # 35   [ ABDT= THEMISTO (g/m2) ]
        Column # 36   [ ABDT= THYin (g/m2) ]
        Column # 37   [ ABDT= THYsp (g/m2) ]
        Column # 38   [ ABDT= TOMOP (g/m2) ]




DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1983 2010

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1983 2010 2 11 1 31



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_BIOM1= Total Dry Mass (g/m2) ]
no problems detected 440 0.190984502 475.672974 440
( 100 %)
422
( 95 %)
Column 3 :
[05_ABDT= ACAlong (g/m2) ]
There is/are 1 count WARNING(S)!

Some of your values are zero or "one".

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.08380604E-03 0.773109138 391
    ( 88 %)
    0
    ( 0 %)
    Column 4 :
    [ 06_ABDT= CALma (g/m2) ]
    no problems detected 440 1.11750001E-03 7.61840773 344
    ( 78 %)
    58
    ( 13 %)
    Column 5 :
    [07_ABDT= CALpa (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.72416004E-03 1.22456801 224
    ( 50 %)
    2
    ( 0 %)
    Column 6 :
    [08_ABDT= CHAETsouth (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.45429897E-03 3.05384707 261
    ( 59 %)
    3
    ( 0 %)
    Column 7 :
    [09_ABDT= CIRRIPED (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.64649996E-03 7.11092758 200
    ( 45 %)
    5
    ( 1 %)
    Column 8 :
    [10_ABDT= CONCHOEC (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.18431996E-03 2.35023856 328
    ( 74 %)
    1
    ( 0 %)
    Column 9 :
    [11_ABDT= EUAbu (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.12556003E-03 4.97164774 399
    ( 90 %)
    4
    ( 0 %)
    Column 10 :
    [12_ABDT= EUAca (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 2.49151001E-03 0.308770597 213
    ( 48 %)
    0
    ( 0 %)
    Column 11 :
    [13_ABDT= EUCHAETA (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.50400004E-03 0.636941850 305
    ( 69 %)
    0
    ( 0 %)
    Column 12 :
    [ 14_ABDT= EUK (g/m2) ]
    no problems detected 440 1.28500001E-03 3.88683224 419
    ( 95 %)
    28
    ( 6 %)
    Column 13 :
    [15_ABDT= EuphEGGS (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.12796598E-03 0.668631256 275
    ( 62 %)
    0
    ( 0 %)
    Column 14 :
    [16_ABDT= EUPHjuvs (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.01606001E-03 0.495234996 337
    ( 76 %)
    0
    ( 0 %)
    Column 15 :
    [ 17_ABDT= EUPpa (g/m2) ]
    no problems detected 440 2.76700011E-03 148.469986 346
    ( 78 %)
    42
    ( 9 %)
    Column 16 :
    [18_ABDT= LARVACEA (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.12599996E-03 2.47768188 278
    ( 63 %)
    2
    ( 0 %)
    Column 17 :
    [ 19_ABDT= LIMAC (g/m2) ]
    no problems detected 440 2.42251996E-03 9.05334473 320
    ( 72 %)
    19
    ( 4 %)
    Column 18 :
    [ 20_ABDT= MEDUS (g/m2) ]
    no problems detected 440 4.56399983E-03 4.09931993 376
    ( 85 %)
    43
    ( 9 %)
    Column 19 :
    [21_ABDT= MESte (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.03249995E-03 0.210674077 256
    ( 58 %)
    0
    ( 0 %)
    Column 20 :
    [22_ABDT= METpa (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.52557902E-03 2.71575761 354
    ( 80 %)
    4
    ( 0 %)
    Column 21 :
    [23_ABDT= MICROCAL (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.07050000E-03 5.13620004E-02 241
    ( 54 %)
    0
    ( 0 %)
    Column 22 :
    [24_ABDT= MOLUSClar (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.01451098E-03 0.361865431 251
    ( 57 %)
    0
    ( 0 %)
    Column 23 :
    [ 25_ABDT= NEOcr (g/m2) ]
    no problems detected 440 1.68099999E-03 22.5882378 389
    ( 88 %)
    51
    ( 11 %)
    Column 24 :
    [26_ABDT= OITat (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.05402002E-03 5.31091988E-02 415
    ( 94 %)
    0
    ( 0 %)
    Column 25 :
    [27_ABDT= OITsi (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.01050001E-03 0.255970031 409
    ( 92 %)
    0
    ( 0 %)
    Column 26 :
    [28_ABDT= PARACAL (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.04591495E-03 0.603694558 292
    ( 66 %)
    0
    ( 0 %)
    Column 27 :
    [29_ABDT= PATel (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 2.22957996E-03 1.47101212 416
    ( 94 %)
    4
    ( 0 %)
    Column 28 :
    [ 30_ABDT= PSEUDOCAL (g/m2) ]
    no problems detected 440 1.36869005E-03 4.19598150 432
    ( 98 %)
    21
    ( 4 %)
    Column 29 :
    [ 31_ABDT= PSSsc (g/m2) ]
    no problems detected 440 2.02704011E-03 2.18809891 352
    ( 80 %)
    9
    ( 2 %)
    Column 30 :
    [32_ABDT= RACan (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.24528003E-03 0.173641786 264
    ( 60 %)
    0
    ( 0 %)
    Column 31 :
    [ 33_ABDT= Remainder (g/m2) ]
    no problems detected 440 2.26787198E-03 9.95231628 440
    ( 100 %)
    62
    ( 14 %)
    Column 32 :
    [34_ABDT= SALPS (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 4.78750002E-03 3.14647651 87
    ( 19 %)
    5
    ( 1 %)
    Column 33 :
    [35_ABDT= SCOmi (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.05016003E-03 8.29233974E-02 405
    ( 92 %)
    0
    ( 0 %)
    Column 34 :
    [36_ABDT= SIPHON (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 2.35207006E-03 0.930129230 317
    ( 72 %)
    0
    ( 0 %)
    Column 35 :
    [37_ABDT= THEMISTO (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 2.50299997E-03 1.38524723 321
    ( 72 %)
    2
    ( 0 %)
    Column 36 :
    [ 38_ABDT= THYin (g/m2) ]
    no problems detected 440 2.99050007E-03 2.39561510 268
    ( 60 %)
    7
    ( 1 %)
    Column 37 :
    [ 39_ABDT= THYsp (g/m2) ]
    no problems detected 440 7.42431823E-03 323.831757 236
    ( 53 %)
    49
    ( 11 %)
    Column 38 :
    [40_ABDT= TOMOP (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 440 1.66750001E-03 0.653711200 235
    ( 53 %)
    0
    ( 0 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".