COPEPODITE Incoming Data Review Fatal Format Issues:   none HEADER REVIEW SECTION [ Jump back to TOP ] SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS Column # 1     [ DATE-YMD ]       Date Set = 1 Column # 2    [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 ) Column # 3    [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 ) Column # 4    [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 ) Column # 5    [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 ) Column # 6    [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 ) Column # 7    [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 ) Column # 8    [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 ) Column # 9    [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 ) Column # 10    [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 ) Column # 11    [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 ) Column # 12    [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 ) Column # 13    [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 ) Column # 14    [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 ) Column # 15    [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 ) Column # 16     [ DATE-YMD ]       Date Set = 2 Column # 17    [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 ) Column # 18    [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 ) Column # 19    [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 ) Column # 20    [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 ) Column # 21    [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 ) Column # 22    [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 ) Column # 23    [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 ) Column # 24    [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 ) Column # 25    [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 ) Column # 26    [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 ) Column # 27    [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 ) Column # 28    [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 ) Column # 29    [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 ) Column # 30    [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 ) Column # 31     [ DATE-YMD ]       Date Set = 3 Column # 32    [TEMP= Temperature ( C )]      ( date set 3 ) Column # 33    [PSAL= Salinity (PSS)]      ( date set 3 ) Column # 34    [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 ) Column # 35    [OTHR= Oxygen (mg/L)]      ( date set 3 ) Column # 36    [LOTH= NO3NO2 (uM)]      ( date set 3 ) Column # 37    [LOTH= NH4 (uM)]      ( date set 3 ) Column # 38    [LOTH= Nitrite (uM)]      ( date set 3 ) Column # 39    [LOTH= Nitrate (uM)]      ( date set 3 ) Column # 40    [LOTH= Phosphate (uM)]      ( date set 3 ) Column # 41    [LOTH= Silicate (uM)]      ( date set 3 ) Column # 42    [LOTH= Total Nitrogen (uM)]      ( date set 3 ) Column # 43    [LOTH= Total Phosphorus (uM)]      ( date set 3 ) Column # 44    [OTHR= Suspended Solids (mg/L)]      ( date set 3 ) Column # 45    [LOTH= Turbidity (FTU)]      ( date set 3 ) DATA SORTED BY CATEGORY TYPES Total Biomass Category     Column # 17   [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]     Column # 18   [ BIOM2= Total Dinophyceae (ug/l) at the surface ]     Column # 19   [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]     Column # 20   [ BIOM2= Total Litostomatea (ug/l) at the surface ]     Column # 21   [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]     Column # 22   [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]     Column # 23   [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]     Column # 24   [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]     Column # 25   [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]     Column # 26   [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]     Column # 27   [ BIOM2= Total Nanoplankton (ug/l) at the surface ]     Column # 28   [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]     Column # 29   [ BIOM2= Total Spirotrichea (ug/l) at the surface ]     Column # 30   [ BIOM2= Total Unidentified (ug/l) at the surface ] Abundance (with zeros) Category     Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]     Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]     Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]     Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]     Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]     Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]     Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]     Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]     Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]     Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]     Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]     Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]     Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]     Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ] Log10 (logarithmic) Miscellaenous Category     Column # 36   [ LOTH= NO3NO2 (uM) ]     Column # 37   [ LOTH= NH4 (uM) ]     Column # 38   [ LOTH= Nitrite (uM) ]     Column # 39   [ LOTH= Nitrate (uM) ]     Column # 40   [ LOTH= Phosphate (uM) ]     Column # 41   [ LOTH= Silicate (uM) ]     Column # 42   [ LOTH= Total Nitrogen (uM) ]     Column # 43   [ LOTH= Total Phosphorus (uM) ]     Column # 45   [ LOTH= Turbidity (FTU) ] non-Log10 (linear) Miscellaenous Category     Column # 35   [ OTHR= Oxygen (mg/L) ]     Column # 44   [ OTHR= Suspended Solids (mg/L) ] Temperatures Category     Column # 32   [ TEMP= Temperature ( C ) ] Salinities Category     Column # 33   [ PSAL= Salinity (PSS) ] Chlorophyll/Pigments Category     Column # 34   [ CHLA= Chlorophyll-a (ug/L) ] DATA SORTED BY GROUPING SETS: Category 1 Group # 2     column # 17     [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]     column # 18     [ BIOM2= Total Dinophyceae (ug/l) at the surface ]     column # 19     [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]     column # 20     [ BIOM2= Total Litostomatea (ug/l) at the surface ]     column # 21     [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]     column # 22     [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]     column # 23     [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]     column # 24     [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]     column # 25     [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]     column # 26     [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]     column # 27     [ BIOM2= Total Nanoplankton (ug/l) at the surface ]     column # 28     [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]     column # 29     [ BIOM2= Total Spirotrichea (ug/l) at the surface ]     column # 30     [ BIOM2= Total Unidentified (ug/l) at the surface ] Category 8 Group # 1     column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]     column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]     column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]     column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]     column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]     column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]     column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]     column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]     column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]     column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]     column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]     column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]     column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]     column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ] DATE REVIEW SECTION [ Jump back to TOP ] DATE COLUMN Comments Minimum Year Maximum Year DATES in Column 1 no problems detected 1985 2012 DATES in Column 16 no problems detected 1985 2012 DATES in Column 31 no problems detected 1979 2012   Date Column Labeling Date Value-Set1 Date Value-Set2 Date Value-Set3 DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max 1 DATE-YMD DATE-YMD yes 1985 2012 01 12 01 31 16 DATE-YMD DATE-YMD yes 1985 2012 01 12 01 31 31 DATE-YMD DATE-YMD yes 1979 2012 01 12 01 31 DATA REVIEW SECTION [ Jump back to TOP ] DATA COLUMN Comments "n" Minimum (non-zero) Maximum Values > 0 Values > 1 Column 2 : [ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ] no problems detected 422 30. 1292500. 422 ( 100%) 422 ( 100%) Column 3 : [ 05_ABDT1= Total Dinophyceae (#/l) at the surface ] no problems detected 424 100. 310000. 424 ( 100%) 424 ( 100%) Column 4 : [ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ] no problems detected 420 700. 3554903.75 420 ( 100%) 420 ( 100%) Column 5 : [ 07_ABDT1= Total Litostomatea (#/l) at the surface ] no problems detected 342 20. 29982. 342 ( 100%) 342 ( 100%) Column 6 : [ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ] no problems detected 340 20. 1366465.5 340 ( 100%) 340 ( 100%) Column 7 : [ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ] no problems detected 96 20. 125746576. 96 ( 100%) 96 ( 100%) Column 8 : [ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ] no problems detected 182 20. 145346400. 182 ( 100%) 182 ( 100%) Column 9 : [ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ] no problems detected 208 2634.88818 13283131. 208 ( 100%) 208 ( 100%) Column 10 : [ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ] no problems detected 202 2195.74023 902581. 202 ( 100%) 202 ( 100%) Column 11 : [ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ] no problems detected 131 20. 76982. 131 ( 100%) 131 ( 100%) Column 12 : [14_ABDT1= Total Nanoplankton (#/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 13 : [ 15_ABDT1= Total Raphidophyceae (#/l) at the surface ] no problems detected 34 200. 19195132. 34 ( 100%) 34 ( 100%) Column 14 : [16_ABDT1= Total Spirotrichea (#/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 15 : [ 17_ABDT1= Total Unidentified (#/l) at the surface ] no problems detected 425 22137.0488 17166736. 425 ( 100%) 425 ( 100%) Column 17 : [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ] no problems detected 388 0.00769999996 261.213409 388 ( 100%) 222 ( 57%) Column 18 : [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ] no problems detected 388 0.0340000018 80.4244995 388 ( 100%) 316 ( 81%) Column 19 : [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ] no problems detected 385 0.0276999995 13.7011003 385 ( 100%) 148 ( 38%) Column 20 : [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ] no problems detected 342 0.0126999998 41.1930008 342 ( 100%) 172 ( 50%) Column 21 : [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ] no problems detected 319 0.00499999989 114.357101 319 ( 100%) 140 ( 43%) Column 22 : [ 23_BIOM2= Total Chlorophyceae (ug/l) at the surface ] no problems detected 92 0.00150000001 46.7913017 92 ( 100%) 14 ( 15%) Column 23 : [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ] no problems detected 171 0.00230000005 273.499908 171 ( 100%) 55 ( 32%) Column 24 : [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ] no problems detected 209 0.0189999994 8690.02539 209 ( 100%) 122 ( 58%) Column 25 : [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ] no problems detected 202 0.0046000001 10.0641003 202 ( 100%) 45 ( 22%) Column 26 : [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ] no problems detected 126 0.00150000001 10.5998001 126 ( 100%) 17 ( 13%) Column 27 : [28_BIOM2= Total Nanoplankton (ug/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 28 : [ 29_BIOM2= Total Raphidophyceae (ug/l) at the surface ] no problems detected 34 0.0147000002 1309.21362 34 ( 100%) 22 ( 64%) Column 29 : [30_BIOM2= Total Spirotrichea (ug/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 30 : [ 31_BIOM2= Total Unidentified (ug/l) at the surface ] no problems detected 388 0.116899997 73.5653 388 ( 100%) 312 ( 80%) Column 32 : [ 32_TEMP= Temperature ( C ) ] no problems detected 748 -1.55929995 16.5396996 740 ( 98%) 729 ( 97%) Column 33 : [ 33_PSAL= Salinity (PSS) ] no problems detected 748 13.6851997 25.5039005 748 ( 100%) 748 ( 100%) Column 34 : [ 34_CHLA= Chlorophyll-a (ug/L) ] no problems detected 704 0.131999999 43.3666992 704 ( 100%) 660 ( 93%) Column 35 : [ 35_OTHR= Oxygen (mg/L) ] no problems detected 747 3.88019991 14.8000002 747 ( 100%) 747 ( 100%) Column 36 : [ 36_LOTH= NO3NO2 (uM) ] no problems detected 690 -0.00139999995 15.7143002 689 ( 99%) 248 ( 35%) Column 37 : [ 37_LOTH= NH4 (uM) ] no problems detected 700 0.0263999999 34.2414017 700 ( 100%) 239 ( 34%) Column 38 : [38_LOTH= Nitrite (uM) ] There is/are 1 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 39 : [39_LOTH= Nitrate (uM) ] There is/are 1 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 40 : [ 40_LOTH= Phosphate (uM) ] no problems detected 700 -0.00549999997 1.38709998 699 ( 99%) 33 ( 4%) Column 41 : [ 41_LOTH= Silicate (uM) ] no problems detected 644 0.107100002 31.7856998 641 ( 99%) 608 ( 94%) Column 42 : [ 42_LOTH= Total Nitrogen (uM) ] no problems detected 700 6.30950022 47.5 700 ( 100%) 700 ( 100%) Column 43 : [ 43_LOTH= Total Phosphorus (uM) ] no problems detected 699 0.196400002 4.83869982 699 ( 100%) 202 ( 28%) Column 44 : [ 44_OTHR= Suspended Solids (mg/L) ] no problems detected 75 2. 13. 75 ( 100%) 75 ( 100%) Column 45 : [45_LOTH= Turbidity (FTU) ] There is/are 1 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".