COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2    [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 )
    Column # 3    [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 4    [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 )
    Column # 5    [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 )
    Column # 6    [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 )
    Column # 7    [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 )
    Column # 8    [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 )
    Column # 9    [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 )
    Column # 10    [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 11    [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 )
    Column # 12    [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 )
    Column # 13    [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 )
    Column # 14    [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 )
    Column # 15    [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 )

    Column # 16     [ DATE-YMD ]       Date Set = 2
    Column # 17    [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 18    [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 19    [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 20    [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 )
    Column # 21    [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 22    [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 23    [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 24    [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 25    [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 26    [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 27    [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 )
    Column # 28    [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 29    [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 )
    Column # 30    [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 )

    Column # 31     [ DATE-YMD ]       Date Set = 3
    Column # 32    [TEMP= Temperature ( C )]      ( date set 3 )
    Column # 33    [PSAL= Salinity (PSS)]      ( date set 3 )
    Column # 34    [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 )
    Column # 35    [OTHR= Oxygen (mg/L)]      ( date set 3 )
    Column # 36    [LOTH= NO3NO2 (uM)]      ( date set 3 )
    Column # 37    [LOTH= NH4 (uM)]      ( date set 3 )
    Column # 38    [LOTH= Nitrite (uM)]      ( date set 3 )
    Column # 39    [LOTH= Nitrate (uM)]      ( date set 3 )
    Column # 40    [LOTH= Phosphate (uM)]      ( date set 3 )
    Column # 41    [LOTH= Silicate (uM)]      ( date set 3 )
    Column # 42    [LOTH= Total Nitrogen (uM)]      ( date set 3 )
    Column # 43    [LOTH= Total Phosphorus (uM)]      ( date set 3 )
    Column # 44    [OTHR= Suspended Solids (mg/L)]      ( date set 3 )
    Column # 45    [LOTH= Turbidity (FTU)]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    Total Biomass Category
        Column # 17   [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        Column # 18   [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        Column # 19   [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        Column # 20   [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        Column # 21   [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        Column # 22   [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        Column # 23   [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        Column # 24   [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        Column # 25   [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        Column # 26   [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        Column # 27   [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        Column # 28   [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        Column # 29   [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        Column # 30   [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]
        Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 36   [ LOTH= NO3NO2 (uM) ]
        Column # 37   [ LOTH= NH4 (uM) ]
        Column # 38   [ LOTH= Nitrite (uM) ]
        Column # 39   [ LOTH= Nitrate (uM) ]
        Column # 40   [ LOTH= Phosphate (uM) ]
        Column # 41   [ LOTH= Silicate (uM) ]
        Column # 42   [ LOTH= Total Nitrogen (uM) ]
        Column # 43   [ LOTH= Total Phosphorus (uM) ]
        Column # 45   [ LOTH= Turbidity (FTU) ]

    non-Log10 (linear) Miscellaenous Category
        Column # 35   [ OTHR= Oxygen (mg/L) ]
        Column # 44   [ OTHR= Suspended Solids (mg/L) ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature ( C ) ]

    Salinities Category
        Column # 33   [ PSAL= Salinity (PSS) ]

    Chlorophyll/Pigments Category
        Column # 34   [ CHLA= Chlorophyll-a (ug/L) ]

DATA SORTED BY GROUPING SETS:

    Category 1 Group # 2
        column # 17     [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        column # 18     [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        column # 19     [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        column # 20     [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        column # 21     [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        column # 22     [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        column # 23     [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        column # 24     [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        column # 25     [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        column # 26     [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        column # 27     [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        column # 28     [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        column # 29     [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        column # 30     [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]
        column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ]



DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1990 2011
DATES in Column 16 no problems detected 1990 2011
DATES in Column 31 no problems detected 1979 2012

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1990 2011 01 12 01 31
16 DATE-YMD DATE-YMD yes 1990 2011 01 12 01 31
31 DATE-YMD DATE-YMD yes 1979 2012 01 12 01 31



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ]
no problems detected 574 40. 79639504. 574
( 100%)
574
( 100%)
Column 3 :
[ 05_ABDT1= Total Dinophyceae (#/l) at the surface ]
no problems detected 528 80. 16790662. 528
( 100%)
528
( 100%)
Column 4 :
[ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ]
no problems detected 538 80. 29531250. 538
( 100%)
538
( 100%)
Column 5 :
[ 07_ABDT1= Total Litostomatea (#/l) at the surface ]
no problems detected 509 40. 551550.5 509
( 100%)
509
( 100%)
Column 6 :
[ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ]
no problems detected 182 40. 1064680. 182
( 100%)
182
( 100%)
Column 7 :
[ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ]
no problems detected 75 399.992004 74993744. 75
( 100%)
75
( 100%)
Column 8 :
[ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ]
no problems detected 56 100. 76781248. 56
( 100%)
56
( 100%)
Column 9 :
[ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
no problems detected 281 1595.34253 5315625. 281
( 100%)
281
( 100%)
Column 10 :
[ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ]
no problems detected 245 2195.74023 7087500. 245
( 100%)
245
( 100%)
Column 11 :
[ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ]
no problems detected 164 40. 3119213.75 164
( 100%)
164
( 100%)
Column 12 :
[14_ABDT1= Total Nanoplankton (#/l) at the surface ]
There is/are 3 count WARNING(S)!

All/most of your values are EMPTY (missing).
This variable will be ignored!


Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 13 :
    [15_ABDT1= Total Raphidophyceae (#/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 5 648.265076 32936.1055 5
    ( 100%)
    5
    ( 100%)
    Column 14 :
    [16_ABDT1= Total Spirotrichea (#/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 15 :
    [ 17_ABDT1= Total Unidentified (#/l) at the surface ]
    no problems detected 550 12600. 29404686. 550
    ( 100%)
    550
    ( 100%)
    Column 17 :
    [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ]
    no problems detected 576 0.00219999999 2637.84619 576
    ( 100%)
    480
    ( 83%)
    Column 18 :
    [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ]
    no problems detected 528 0.00410000002 4897.11523 528
    ( 100%)
    321
    ( 60%)
    Column 19 :
    [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ]
    no problems detected 538 0.00039999999 178.592194 538
    ( 100%)
    339
    ( 63%)
    Column 20 :
    [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ]
    no problems detected 509 0.0104 397.249695 509
    ( 100%)
    313
    ( 61%)
    Column 21 :
    [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ]
    no problems detected 182 0.00120000006 31.6210003 182
    ( 100%)
    76
    ( 41%)
    Column 22 :
    [ 23_BIOM2= Total Chlorophyceae (ug/l) at the surface ]
    no problems detected 75 0.00510000018 54.7983017 75
    ( 100%)
    6
    ( 8%)
    Column 23 :
    [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ]
    no problems detected 56 0.000899999985 14.9252005 56
    ( 100%)
    6
    ( 10%)
    Column 24 :
    [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
    no problems detected 281 0.0197999999 22.5412998 281
    ( 100%)
    98
    ( 34%)
    Column 25 :
    [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ]
    no problems detected 245 0.0037 78.3595963 245
    ( 100%)
    100
    ( 40%)
    Column 26 :
    [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ]
    no problems detected 164 0.00150000001 183.9655 164
    ( 100%)
    26
    ( 15%)
    Column 27 :
    [28_BIOM2= Total Nanoplankton (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 28 :
    [29_BIOM2= Total Raphidophyceae (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 5 0.069600001 3.22679996 5
    ( 100%)
    1
    ( 20%)
    Column 29 :
    [30_BIOM2= Total Spirotrichea (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 30 :
    [ 31_BIOM2= Total Unidentified (ug/l) at the surface ]
    no problems detected 551 0.023 229.3452 551
    ( 100%)
    346
    ( 62%)
    Column 32 :
    [ 32_TEMP= Temperature ( C ) ]
    no problems detected 793 0.216700003 21.8999996 793
    ( 100%)
    787
    ( 99%)
    Column 33 :
    [ 33_PSAL= Salinity (PSS) ]
    no problems detected 782 14.4499998 20.5386009 782
    ( 100%)
    782
    ( 100%)
    Column 34 :
    [ 34_CHLA= Chlorophyll-a (ug/L) ]
    no problems detected 233 0.300000012 76. 233
    ( 100%)
    214
    ( 91%)
    Column 35 :
    [ 35_OTHR= Oxygen (mg/L) ]
    no problems detected 768 0.246399999 13.5 767
    ( 99%)
    766
    ( 99%)
    Column 36 :
    [ 36_LOTH= NO3NO2 (uM) ]
    no problems detected 590 0.107100002 340.714294 590
    ( 100%)
    534
    ( 90%)
    Column 37 :
    [ 37_LOTH= NH4 (uM) ]
    no problems detected 586 0.142900005 139.285706 586
    ( 100%)
    414
    ( 70%)
    Column 38 :
    [38_LOTH= Nitrite (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 39 :
    [39_LOTH= Nitrate (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 40 :
    [ 40_LOTH= Phosphate (uM) ]
    no problems detected 592 0.0322999991 9.35480022 592
    ( 100%)
    314
    ( 53%)
    Column 41 :
    [ 41_LOTH= Silicate (uM) ]
    no problems detected 449 0.128600001 385.714294 449
    ( 100%)
    444
    ( 98%)
    Column 42 :
    [ 42_LOTH= Total Nitrogen (uM) ]
    no problems detected 521 27.0713997 377.142914 521
    ( 100%)
    521
    ( 100%)
    Column 43 :
    [ 43_LOTH= Total Phosphorus (uM) ]
    no problems detected 520 0.322600007 11.6128998 520
    ( 100%)
    482
    ( 92%)
    Column 44 :
    [44_OTHR= Suspended Solids (mg/L) ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999. -9999999. 0
    ( -2147483648%)
    0
    ( -2147483648%)
    Column 45 :
    [45_LOTH= Turbidity (FTU) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 3 1460.38794 1477.2782 3
    ( 100%)
    3
    ( 100%)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".