COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2    [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 )
    Column # 3    [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 4    [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 )
    Column # 5    [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 )
    Column # 6    [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 )
    Column # 7    [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 )
    Column # 8    [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 )
    Column # 9    [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 )
    Column # 10    [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 11    [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 )
    Column # 12    [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 )
    Column # 13    [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 )
    Column # 14    [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 )
    Column # 15    [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 )

    Column # 16     [ DATE-YMD ]       Date Set = 2
    Column # 17    [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 18    [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 19    [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 20    [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 )
    Column # 21    [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 22    [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 23    [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 24    [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 25    [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 26    [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 27    [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 )
    Column # 28    [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 29    [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 )
    Column # 30    [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 )

    Column # 31     [ DATE-YMD ]       Date Set = 3
    Column # 32    [TEMP= Temperature ( C )]      ( date set 3 )
    Column # 33    [PSAL= Salinity (PSS)]      ( date set 3 )
    Column # 34    [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 )
    Column # 35    [OTHR= Oxygen (mg/L)]      ( date set 3 )
    Column # 36    [LOTH= NO3NO2 (uM)]      ( date set 3 )
    Column # 37    [LOTH= NH4 (uM)]      ( date set 3 )
    Column # 38    [LOTH= Nitrite (uM)]      ( date set 3 )
    Column # 39    [LOTH= Nitrate (uM)]      ( date set 3 )
    Column # 40    [LOTH= Phosphate (uM)]      ( date set 3 )
    Column # 41    [LOTH= Silicate (uM)]      ( date set 3 )
    Column # 42    [LOTH= Total Nitrogen (uM)]      ( date set 3 )
    Column # 43    [LOTH= Total Phosphorus (uM)]      ( date set 3 )
    Column # 44    [OTHR= Suspended Solids (mg/L)]      ( date set 3 )
    Column # 45    [LOTH= Turbidity (FTU)]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    Total Biomass Category
        Column # 17   [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        Column # 18   [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        Column # 19   [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        Column # 20   [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        Column # 21   [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        Column # 22   [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        Column # 23   [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        Column # 24   [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        Column # 25   [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        Column # 26   [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        Column # 27   [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        Column # 28   [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        Column # 29   [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        Column # 30   [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]
        Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 36   [ LOTH= NO3NO2 (uM) ]
        Column # 37   [ LOTH= NH4 (uM) ]
        Column # 38   [ LOTH= Nitrite (uM) ]
        Column # 39   [ LOTH= Nitrate (uM) ]
        Column # 40   [ LOTH= Phosphate (uM) ]
        Column # 41   [ LOTH= Silicate (uM) ]
        Column # 42   [ LOTH= Total Nitrogen (uM) ]
        Column # 43   [ LOTH= Total Phosphorus (uM) ]
        Column # 45   [ LOTH= Turbidity (FTU) ]

    non-Log10 (linear) Miscellaenous Category
        Column # 35   [ OTHR= Oxygen (mg/L) ]
        Column # 44   [ OTHR= Suspended Solids (mg/L) ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature ( C ) ]

    Salinities Category
        Column # 33   [ PSAL= Salinity (PSS) ]

    Chlorophyll/Pigments Category
        Column # 34   [ CHLA= Chlorophyll-a (ug/L) ]

DATA SORTED BY GROUPING SETS:

    Category 1 Group # 2
        column # 17     [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        column # 18     [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        column # 19     [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        column # 20     [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        column # 21     [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        column # 22     [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        column # 23     [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        column # 24     [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        column # 25     [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        column # 26     [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        column # 27     [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        column # 28     [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        column # 29     [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        column # 30     [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]
        column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ]


DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1979 2011
DATES in Column 16 no problems detected 1979 2011
DATES in Column 31 no problems detected 1979 2012

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1979 2011 01 12 01 31
16 DATE-YMD DATE-YMD yes 1979 2011 01 12 01 31
31 DATE-YMD DATE-YMD yes 1979 2012 01 12 01 31


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ] 		no problems detected 366 26.6595001 7937012.5 366
( 100%)		 366
( 100%)
Column 3 :
[ 05_ABDT1= Total Dinophyceae (#/l) at the surface ] 		no problems detected 358 19.9946003 220350. 358
( 100%)		 358
( 100%)
Column 4 :
[ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ] 		no problems detected 361 200. 1781060. 361
( 100%)		 361
( 100%)
Column 5 :
[ 07_ABDT1= Total Litostomatea (#/l) at the surface ] 		no problems detected 280 19.9946003 111501.789 280
( 100%)		 280
( 100%)
Column 6 :
[ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ] 		no problems detected 252 19.9946003 856388.688 252
( 100%)		 252
( 100%)
Column 7 :
[ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ] 		no problems detected 133 40. 54573360. 133
( 100%)		 133
( 100%)
Column 8 :
[ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ] 		no problems detected 168 19.9946003 1460357.5 168
( 100%)		 168
( 100%)
Column 9 :
[ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ] 		no problems detected 82 1317.44421 1944717.62 82
( 100%)		 82
( 100%)
Column 10 :
[ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ] 		no problems detected 193 360. 787546.188 193
( 100%)		 193
( 100%)
Column 11 :
[ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ] 		no problems detected 199 40. 128520. 199
( 100%)		 199
( 100%)
Column 12 :
[ 14_ABDT1= Total Nanoplankton (#/l) at the surface ] 		no problems detected 136 7080. 8829047. 136
( 100%)		 136
( 100%)
Column 13 :
[ 15_ABDT1= Total Raphidophyceae (#/l) at the surface ] 		no problems detected 34 80. 1024125. 34
( 100%)		 34
( 100%)
Column 14 :
[16_ABDT1= Total Spirotrichea (#/l) at the surface ] 		There is/are 3 count WARNING(S)!

All/most of your values are EMPTY (missing).
This variable will be ignored!

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  0 9999999. -9999999. 0
    ( -2147483648%)    		 0
    ( -2147483648%)
    Column 15 :
    [ 17_ABDT1= Total Unidentified (#/l) at the surface ]     		no problems detected 240 33.3951988 6371160. 240
    ( 100%)    		 240
    ( 100%)
    Column 17 :
    [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ]     		no problems detected 366 0.00150000001 132.305603 366
    ( 100%)    		 128
    ( 34%)
    Column 18 :
    [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ]     		no problems detected 358 0.00310000009 46.6492004 358
    ( 100%)    		 158
    ( 44%)
    Column 19 :
    [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ]     		no problems detected 361 0.00520000001 44.5265007 361
    ( 100%)    		 170
    ( 47%)
    Column 20 :
    [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ]     		no problems detected 280 0.0074 75.490799 280
    ( 100%)    		 120
    ( 42%)
    Column 21 :
    [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ]     		no problems detected 252 0.00340000005 27.8966007 252
    ( 100%)    		 40
    ( 15%)
    Column 22 :
    [ 23_BIOM2= Total Chlorophyceae (ug/l) at the surface ]     		no problems detected 133 0.00079999998 21.8292999 133
    ( 100%)    		 49
    ( 36%)
    Column 23 :
    [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ]     		no problems detected 168 9.99999975E-05 207.019394 168
    ( 100%)    		 51
    ( 30%)
    Column 24 :
    [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]     		no problems detected 82 0.0164000001 35.7304993 82
    ( 100%)    		 36
    ( 43%)
    Column 25 :
    [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ]     		no problems detected 193 0.00949999969 8.72869968 193
    ( 100%)    		 43
    ( 22%)
    Column 26 :
    [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ]     		no problems detected 199 0.000899999985 26.2416 199
    ( 100%)    		 38
    ( 19%)
    Column 27 :
    [ 28_BIOM2= Total Nanoplankton (ug/l) at the surface ]     		no problems detected 136 0.0703999996 112.915901 136
    ( 100%)    		 131
    ( 96%)
    Column 28 :
    [ 29_BIOM2= Total Raphidophyceae (ug/l) at the surface ]     		no problems detected 34 0.00469999993 90.2416992 34
    ( 100%)    		 16
    ( 47%)
    Column 29 :
    [30_BIOM2= Total Spirotrichea (ug/l) at the surface ]     		There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  0 9999999. -9999999. 0
    ( -2147483648%)    		 0
    ( -2147483648%)
    Column 30 :
    [ 31_BIOM2= Total Unidentified (ug/l) at the surface ]     		no problems detected 239 0.00109999999 40.1105003 239
    ( 100%)    		 173
    ( 72%)
    Column 32 :
    [ 32_TEMP= Temperature ( C ) ]     		no problems detected 706 2.10369992 14.4987001 706
    ( 100%)    		 706
    ( 100%)
    Column 33 :
    [ 33_PSAL= Salinity (PSS) ]     		no problems detected 685 9.87139988 32.9676018 685
    ( 100%)    		 685
    ( 100%)
    Column 34 :
    [ 34_CHLA= Chlorophyll-a (ug/L) ]     		no problems detected 691 0.100000001 11.0500002 691
    ( 100%)    		 465
    ( 67%)
    Column 35 :
    [ 35_OTHR= Oxygen (mg/L) ]     		no problems detected 698 3.17569995 14.4827995 698
    ( 100%)    		 698
    ( 100%)
    Column 36 :
    [ 36_LOTH= NO3NO2 (uM) ]     		no problems detected 664 -0.109499998 14.8213997 611
    ( 92%)    		 303
    ( 45%)
    Column 37 :
    [ 37_LOTH= NH4 (uM) ]     		no problems detected 689 -0.0524000004 4.60360003 658
    ( 95%)    		 118
    ( 17%)
    Column 38 :
    [ 38_LOTH= Nitrite (uM) ]     		no problems detected 213 -0.00939999986 1.52190006 190
    ( 89%)    		 6
    ( 2%)
    Column 39 :
    [ 39_LOTH= Nitrate (uM) ]     		no problems detected 213 0.00170000002 13.6643 197
    ( 92%)    		 104
    ( 48%)
    Column 40 :
    [ 40_LOTH= Phosphate (uM) ]     		no problems detected 695 0.0104 1.35810006 685
    ( 98%)    		 4
    ( 0%)
    Column 41 :
    [ 41_LOTH= Silicate (uM) ]     		no problems detected 677 0.201199993 27.7600002 677
    ( 100%)    		 663
    ( 97%)
    Column 42 :
    [ 42_LOTH= Total Nitrogen (uM) ]     		no problems detected 556 9.76189995 39.6035995 556
    ( 100%)    		 556
    ( 100%)
    Column 43 :
    [ 43_LOTH= Total Phosphorus (uM) ]     		no problems detected 672 0.204300001 3.32540011 672
    ( 100%)    		 87
    ( 12%)
    Column 44 :
    [44_OTHR= Suspended Solids (mg/L) ]     		There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  0 9999999. -9999999. 0
    ( -2147483648%)    		 0
    ( -2147483648%)
    Column 45 :
    [ 45_LOTH= Turbidity (FTU) ]     		no problems detected 44 2.73449993 281.835602 44
    ( 100%)    		 44
    ( 100%)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".