COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-MDY ]       Date Set = 1
    Column # 2     [BIOM= Total Wet Mass (mg/m3)]      ( date set 1 )
    Column # 3     [BIOM= Total Copepod Biomass (mg/m3)]      ( date set 1 )
    Column # 4     [OTHR= Relative Copepod Biomass (%)]      ( date set 1 )

    Column # 5     [ DATE-YMD ]       Date Set = 2
    Column # 6     [TEMP= Temperature (C) in the upper 5 meters]      ( date set 2 )
    Column # 7     [PSAL= Salinity () in the upper 5 meters]      ( date set 2 )
    Column # 8     [OTHR= Oxygen (ml/l) in the upper 5 meters]      ( date set 2 )

    Column # 9     [ DATE-YMD ]       Date Set = 3
    Column # 10     [TEMP= Temperature (C) in the upper 10 meters]      ( date set 3 )
    Column # 11     [PSAL= Salinity () in the upper 10 meters]      ( date set 3 )
    Column # 12     [OTHR= Oxygen (ml/l) in the upper 10 meters]      ( date set 3 )
    Column # 13     [LOTH= Silicate (uM) in the upper 10 meters]      ( date set 3 )
    Column # 14     [LOTH= Phosphate (uM) in the upper 10 meters]      ( date set 3 )
    Column # 15     [LOTH= Nitrate (uM) in the upper 10 meters]      ( date set 3 )
    Column # 16     [CHLA= Chlorophyll (mg/m3) in the upper 10 meters]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    non-Log10 (linear) Miscellaenous Category
        Column # 4   [ OTHR= Relative Copepod Biomass (%) ]
        Column # 8   [ OTHR= Oxygen (ml/l) in the upper 5 meters ]
        Column # 12   [ OTHR= Oxygen (ml/l) in the upper 10 meters ]

    Temperatures Category
        Column # 6   [ TEMP= Temperature (C) in the upper 5 meters ]
        Column # 10   [ TEMP= Temperature (C) in the upper 10 meters ]

    Salinities Category
        Column # 7   [ PSAL= Salinity () in the upper 5 meters ]
        Column # 11   [ PSAL= Salinity () in the upper 10 meters ]



DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1996 2013
DATES in Column 5 no problems detected 1968 2014
DATES in Column 9 no problems detected 1959 2014

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-MDY DATE-MDY yes 2 9 1 30 1996 2013
5 DATE-YMD DATE-YMD yes 1968 2014 01 12 01 31
9 DATE-YMD DATE-YMD yes 1959 2014 01 12 01 31


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_BIOM= Total Wet Mass (mg/m3) ] 		no problems detected 74 3.00600004 466.391998 74
( 100 %)		 74
( 100 %)
Column 3 :
[ 05_BIOM= Total Copepod Biomass (mg/m3) ] 		no problems detected 74 0.440299988 268.273895 74
( 100 %)		 69
( 93 %)
Column 4 :
[06_OTHR= Relative Copepod Biomass (%) ] 		There is/are 1 count WARNING(S)!

Some of your values are zero or "one".

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  74 1.99999996E-02 0.850000024 73
    ( 98 %)    		 0
    ( 0 %)
    Column 6 :
    [ 07_TEMP= Temperature (C) in the upper 5 meters ]     		no problems detected 873 5.32000017 16.1968002 873
    ( 100 %)    		 873
    ( 100 %)
    Column 7 :
    [ 08_PSAL= Salinity () in the upper 5 meters ]     		no problems detected 867 31.9890995 33.1595993 867
    ( 100 %)    		 867
    ( 100 %)
    Column 8 :
    [ 09_OTHR= Oxygen (ml/l) in the upper 5 meters ]     		no problems detected 279 5.59000015 9.00000000 279
    ( 100 %)    		 279
    ( 100 %)
    Column 10 :
    [ 10_TEMP= Temperature (C) in the upper 10 meters ]     		no problems detected 304 5.00000000 16.0049000 304
    ( 100 %)    		 304
    ( 100 %)
    Column 11 :
    [ 11_PSAL= Salinity () in the upper 10 meters ]     		no problems detected 299 32.2669983 32.9519997 299
    ( 100 %)    		 299
    ( 100 %)
    Column 12 :
    [ 12_OTHR= Oxygen (ml/l) in the upper 10 meters ]     		no problems detected 157 5.72800016 7.48000002 157
    ( 100 %)    		 157
    ( 100 %)
    Column 13 :
    [ 13_LOTH= Silicate (uM) in the upper 10 meters ]     		no problems detected 253 0.400000006 23.5000000 252
    ( 99 %)    		 246
    ( 97 %)
    Column 14 :
    [ 14_LOTH= Phosphate (uM) in the upper 10 meters ]     		no problems detected 252 0.439999998 9.00000000 251
    ( 99 %)    		 109
    ( 43 %)
    Column 15 :
    [ 15_LOTH= Nitrate (uM) in the upper 10 meters ]     		no problems detected 253 0.899999976 15.1999998 252
    ( 99 %)    		 249
    ( 98 %)
    Column 16 :
    [16_CHLA= Chlorophyll (mg/m3) in the upper 10 meters ]     		There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  163 9.00000036E-02 6.00000000 163
    ( 100 %)    		 1
    ( 0 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".