COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-DMY ]       Date Set = 1
    Column # 2     [TEMP= Temperature (C) at the surface]      ( date set 1 )
    Column # 3     [PSAL= Salinity () at the surface]      ( date set 1 )
    Column # 4     [CHLA= Chlorophyll (ug/l) at the surface]      ( date set 1 )
    Column # 5     [OTHR= Secchi Depth (m)]      ( date set 1 )
    Column # 6     [OTHR= Oxygen (mg/l) at the surface]      ( date set 1 )
    Column # 7     [OTHR= pH () at the surface]      ( date set 1 )
    Column # 8     [LOTH= Turbidity (NTU) at the surface]      ( date set 1 )

    Column # 9     [ DATE-DMY ]       Date Set = 2
    Column # 10     [LOTH= NO3NO2-N (ug/l) at the surface]      ( date set 2 )
    Column # 11     [LOTH= Ammonium-N (ug/l) at the surface]      ( date set 2 )
    Column # 12     [LOTH= Phosphate-P (ug/l) at the surface]      ( date set 2 )
    Column # 13     [LOTH= Silicate-Si (ug/l) at the surface]      ( date set 2 )


DATA SORTED BY CATEGORY TYPES

    non-Log10 (linear) Miscellaenous Category
        Column # 5   [ OTHR= Secchi Depth (m) ]
        Column # 6   [ OTHR= Oxygen (mg/l) at the surface ]
        Column # 7   [ OTHR= pH () at the surface ]

    Temperatures Category
        Column # 2   [ TEMP= Temperature (C) at the surface ]

    Salinities Category
        Column # 3   [ PSAL= Salinity () at the surface ]



DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1994 2010
DATES in Column 9 no problems detected 1994 2010

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-DMY DATE-DMY yes 01 31 Apr Sep 00 99
9 DATE-DMY DATE-DMY yes 01 31 Apr Sep 00 99


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_TEMP= Temperature (C) at the surface ] 		no problems detected 603 0.266999990 33.6300011 603
( 100 %)		 602
( 99 %)
Column 3 :
[05_PSAL= Salinity () at the surface ] 		There is/are 1 count WARNING(S)!

Some of your values are zero or "one".

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  587 9.99999978E-03 1.00999999 472
    ( 80 %)    		 1
    ( 0 %)
    Column 4 :
    [ 06_CHLA= Chlorophyll (ug/l) at the surface ]     		no problems detected 229 -0.200000003 27.5000000 228
    ( 99 %)    		 225
    ( 98 %)
    Column 5 :
    [ 07_OTHR= Secchi Depth (m) ]     		no problems detected 235 0.300000012 1.70000005 235
    ( 100 %)    		 61
    ( 25 %)
    Column 6 :
    [ 08_OTHR= Oxygen (mg/l) at the surface ]     		no problems detected 602 0.129999995 16.3999996 602
    ( 100 %)    		 600
    ( 99 %)
    Column 7 :
    [ 09_OTHR= pH () at the surface ]     		no problems detected 597 4.25000000 9.39999962 597
    ( 100 %)    		 597
    ( 100 %)
    Column 8 :
    [ 10_LOTH= Turbidity (NTU) at the surface ]     		no problems detected 227 2.00000000 51.2999992 227
    ( 100 %)    		 227
    ( 100 %)
    Column 10 :
    [ 11_LOTH= NO3NO2-N (ug/l) at the surface ]     		no problems detected 402 10.0000000 1303.08997 402
    ( 100 %)    		 402
    ( 100 %)
    Column 11 :
    [ 12_LOTH= Ammonium-N (ug/l) at the surface ]     		no problems detected 402 4.01999998 349.200012 401
    ( 99 %)    		 401
    ( 99 %)
    Column 12 :
    [ 13_LOTH= Phosphate-P (ug/l) at the surface ]     		no problems detected 393 0.432999998 150.000000 393
    ( 100 %)    		 392
    ( 99 %)
    Column 13 :
    [ 14_LOTH= Silicate-Si (ug/l) at the surface ]     		no problems detected 254 4.28000021 167.708572 254
    ( 100 %)    		 254
    ( 100 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".