COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2     [BIOM1= Total Dry Mass (g/m2)]      ( date set 1 )
    Column # 3     [BIOM1= Dry Mass <1000 um (g/m2)]      ( date set 1 )
    Column # 4     [BIOM1= Dry Mass 1000-2000 um (g/m2)]      ( date set 1 )
    Column # 5     [BIOM1= Dry Mass >2000 um (g/m2)]      ( date set 1 )

    Column # 6     [ DATE-YMD ]       Date Set = 2
    Column # 7     [CHLA1= Surface Chlorophyll (mg/m3)]      ( date set 2 )
    Column # 8     [CHLA1= Integrated Chlorophyll (mg/m3) from 0-20m]      ( date set 2 )
    Column # 9     [CHLA1= Integrated Chlorophyll (mg/m3) from 0-50m]      ( date set 2 )
    Column # 10     [CHLA1= Integrated Chlorophyll (mg/m3) from 0-bottom]      ( date set 2 )

    Column # 11     [ DATE-YMD ]       Date Set = 3
    Column # 12     [TEMP1= Surface Temperature (C)]      ( date set 3 )

    Column # 13     [ DATE-YMD ]       Date Set = 4
    Column # 14     [PSAL= Surface Salinity ()]      ( date set 4 )

    Column # 15     [ DATE-YMD ]       Date Set = 5
    Column # 16     [TEMP1= Average Temperature (C) from surface to bottom]      ( date set 5 )

    Column # 17     [ DATE-YMD ]       Date Set = 6
    Column # 18     [PSAL= Average Salinity () from surface to bottom]      ( date set 6 )


DATA SORTED BY CATEGORY TYPES

    Temperatures Category
        Column # 12   [ TEMP1= Surface Temperature (C) ]
        Column # 16   [ TEMP1= Average Temperature (C) from surface to bottom ]

    Salinities Category
        Column # 14   [ PSAL= Surface Salinity () ]
        Column # 18   [ PSAL= Average Salinity () from surface to bottom ]

DATA SORTED BY GROUPING SETS:

    Category 4 Group # 1
        column # 12     [ TEMP1= Surface Temperature (C) ]
        column # 16     [ TEMP1= Average Temperature (C) from surface to bottom ]


DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1995 2019
DATES in Column 6 no problems detected 1980 2014
DATES in Column 11 no problems detected 1990 2015
DATES in Column 13 no problems detected 1990 2015
DATES in Column 15 no problems detected 1990 2015
DATES in Column 17 no problems detected 1990 2015

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1995 2019 1 11 1 31
6 DATE-YMD DATE-YMD yes 1980 2014 1 12 1 31
11 DATE-YMD DATE-YMD yes 1990 2015 01 11 15 15
13 DATE-YMD DATE-YMD yes 1990 2015 01 11 15 15
15 DATE-YMD DATE-YMD yes 1990 2015 01 11 15 15
17 DATE-YMD DATE-YMD yes 1990 2015 01 11 15 15


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_BIOM1= Total Dry Mass (g/m2) ] 		no problems detected 548 3.51999998E-02 74.4944000 548
( 100 %)		 448
( 81 %)
Column 3 :
[ 05_BIOM1= Dry Mass <1000 um (g/m2) ] 		no problems detected 549 8.00000038E-03 29.6959991 549
( 100 %)		 235
( 42 %)
Column 4 :
[ 06_BIOM1= Dry Mass 1000-2000 um (g/m2) ] 		no problems detected 548 8.00000038E-03 61.3848000 545
( 99 %)		 331
( 60 %)
Column 5 :
[ 07_BIOM1= Dry Mass >2000 um (g/m2) ] 		no problems detected 549 8.00000038E-03 8.72799969 494
( 89 %)		 185
( 33 %)
Column 7 :
[ 08_CHLA1= Surface Chlorophyll (mg/m3) ] 		no problems detected 1124 1.00000005E-03 12.9540005 1093
( 97 %)		 191
( 16 %)
Column 8 :
[ 09_CHLA1= Integrated Chlorophyll (mg/m3) from 0-20m ] 		no problems detected 1114 6.00000028E-04 11.6374998 1112
( 99 %)		 190
( 17 %)
Column 9 :
[ 10_CHLA1= Integrated Chlorophyll (mg/m3) from 0-50m ] 		no problems detected 1114 5.00000024E-04 7.92850018 1113
( 99 %)		 141
( 12 %)
Column 10 :
[ 11_CHLA1= Integrated Chlorophyll (mg/m3) from 0-bottom ] 		no problems detected 1114 5.00000024E-04 7.58109999 1114
( 100 %)		 101
( 9 %)
Column 12 :
[ 12_TEMP1= Surface Temperature (C) ] 		no problems detected 120 -1.71800005 10.7065001 118
( 98 %)		 118
( 98 %)
Column 14 :
[ 13_PSAL= Surface Salinity () ] 		no problems detected 120 34.2144012 35.1561012 120
( 100 %)		 120
( 100 %)
Column 16 :
[ 14_TEMP1= Average Temperature (C) from surface to bottom ] 		no problems detected 142 1.63499999 6.88000011 142
( 100 %)		 142
( 100 %)
Column 18 :
[ 15_PSAL= Average Salinity () from surface to bottom ] 		no problems detected 142 34.5085983 35.1599998 142
( 100 %)		 142
( 100 %)

The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".