COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2    [ABDT1= Total Diatoms (#/L) at the surface]      ( date set 1 )

    Column # 3     [ DATE-YMD ]       Date Set = 2
    Column # 4    [ABDT1= Total Dinoflagellates (#/L) at the surface]      ( date set 2 )

    Column # 5     [ DATE-YMD ]       Date Set = 3
    Column # 6    [TEMP= Temperature (C) at the surface]      ( date set 3 )

    Column # 7     [ DATE-YMD ]       Date Set = 4
    Column # 8    [PSAL= Salinity () at the surface]      ( date set 4 )

    Column # 9     [ DATE-YMD ]       Date Set = 5
    Column # 10    [OTHR= Oxygen (ml/l) at the surface]      ( date set 5 )

    Column # 11     [ DATE-YMD ]       Date Set = 6
    Column # 12    [LOTH= NO3+NO2 (uM) at the surface]      ( date set 6 )

    Column # 13     [ DATE-YMD ]       Date Set = 7
    Column # 14    [LOTH= NH4 (uM) at the surface]      ( date set 7 )

    Column # 15     [ DATE-YMD ]       Date Set = 8
    Column # 16    [LOTH= PO4 (uM) at the surface]      ( date set 8 )

    Column # 17     [ DATE-YMD ]       Date Set = 9
    Column # 18    [LOTH= SiO4 (uM) at the surface]      ( date set 9 )

    Column # 19     [ DATE-YMD ]       Date Set = 10
    Column # 20    [CHLA= Chlorophyll (ug/L) at the surface]      ( date set 10 )


DATA SORTED BY CATEGORY TYPES

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatoms (#/L) at the surface ]
        Column # 4   [ ABDT1= Total Dinoflagellates (#/L) at the surface ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 12   [ LOTH= NO3+NO2 (uM) at the surface ]
        Column # 14   [ LOTH= NH4 (uM) at the surface ]
        Column # 16   [ LOTH= PO4 (uM) at the surface ]
        Column # 18   [ LOTH= SiO4 (uM) at the surface ]

    non-Log10 (linear) Miscellaenous Category
        Column # 10   [ OTHR= Oxygen (ml/l) at the surface ]

    Temperatures Category
        Column # 6   [ TEMP= Temperature (C) at the surface ]

    Salinities Category
        Column # 8   [ PSAL= Salinity () at the surface ]

    Chlorophyll/Pigments Category
        Column # 20   [ CHLA= Chlorophyll (ug/L) at the surface ]

DATA SORTED BY GROUPING SETS:

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatoms (#/L) at the surface ]
        column # 4     [ ABDT1= Total Dinoflagellates (#/L) at the surface ]


DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 2002 2018
DATES in Column 3 no problems detected 2002 2018
DATES in Column 5 no problems detected 2002 2018
DATES in Column 7 no problems detected 2002 2018
DATES in Column 9 no problems detected 2002 2018
DATES in Column 11 no problems detected 2002 2018
DATES in Column 13 no problems detected 2002 2018
DATES in Column 15 no problems detected 2002 2018
DATES in Column 17 no problems detected 2002 2018
DATES in Column 19 no problems detected 2002 2018

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
3 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
5 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
7 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
9 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
11 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
13 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
15 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
17 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
19 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatoms (#/L) at the surface ] 		no problems detected 201 2900. 1465900. 201
( 100%)		 201
( 100%)
Column 4 :
[ 05_ABDT1= Total Dinoflagellates (#/L) at the surface ] 		no problems detected 164 100. 18600. 164
( 100%)		 164
( 100%)
Column 6 :
[ 06_TEMP= Temperature (C) at the surface ] 		no problems detected 261 6.09000015 20.8999996 261
( 100%)		 261
( 100%)
Column 8 :
[ 07_PSAL= Salinity () at the surface ] 		no problems detected 266 30.2000008 35.9000015 266
( 100%)		 266
( 100%)
Column 10 :
[ 08_OTHR= Oxygen (ml/l) at the surface ] 		no problems detected 242 7.19999981 20.1800003 242
( 100%)		 242
( 100%)
Column 12 :
[ 09_LOTH= NO3+NO2 (uM) at the surface ] 		no problems detected 220 0.00999999978 71.5999985 220
( 100%)		 115
( 52%)
Column 14 :
[ 10_LOTH= NH4 (uM) at the surface ] 		no problems detected 214 0.00499999989 4.42999983 214
( 100%)		 18
( 8%)
Column 16 :
[ 11_LOTH= PO4 (uM) at the surface ] 		no problems detected 219 0.0199999996 1.36000001 219
( 100%)		 3
( 1%)
Column 18 :
[ 12_LOTH= SiO4 (uM) at the surface ] 		no problems detected 224 0.180000007 30.9799995 224
( 100%)		 196
( 87%)
Column 20 :
[ 13_CHLA= Chlorophyll (ug/L) at the surface ] 		no problems detected 261 0.0500000007 7.94999981 261
( 100%)		 124
( 47%)

The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".