COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2    [ABDT1= Total Diatoms (#/L) at the surface]      ( date set 1 )

    Column # 3     [ DATE-YMD ]       Date Set = 2
    Column # 4    [ABDT1= Total Dinoflagellates (#/L) at the surface]      ( date set 2 )

    Column # 5     [ DATE-YMD ]       Date Set = 3
    Column # 6    [TEMP= Temperature (C) at the surface]      ( date set 3 )

    Column # 7     [ DATE-YMD ]       Date Set = 4
    Column # 8    [PSAL= Salinity () at the surface]      ( date set 4 )

    Column # 9     [ DATE-YMD ]       Date Set = 5
    Column # 10    [OTHR= Oxygen (ml/l) at the surface]      ( date set 5 )

    Column # 11     [ DATE-YMD ]       Date Set = 6
    Column # 12    [LOTH= NO3+NO2 (uM) at the surface]      ( date set 6 )

    Column # 13     [ DATE-YMD ]       Date Set = 7
    Column # 14    [LOTH= NH4 (uM) at the surface]      ( date set 7 )

    Column # 15     [ DATE-YMD ]       Date Set = 8
    Column # 16    [LOTH= PO4 (uM) at the surface]      ( date set 8 )

    Column # 17     [ DATE-YMD ]       Date Set = 9
    Column # 18    [LOTH= SiO4 (uM) at the surface]      ( date set 9 )

    Column # 19     [ DATE-YMD ]       Date Set = 10
    Column # 20    [CHLA= Chlorophyll (ug/L) at the surface]      ( date set 10 )


DATA SORTED BY CATEGORY TYPES

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatoms (#/L) at the surface ]
        Column # 4   [ ABDT1= Total Dinoflagellates (#/L) at the surface ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 12   [ LOTH= NO3+NO2 (uM) at the surface ]
        Column # 14   [ LOTH= NH4 (uM) at the surface ]
        Column # 16   [ LOTH= PO4 (uM) at the surface ]
        Column # 18   [ LOTH= SiO4 (uM) at the surface ]

    non-Log10 (linear) Miscellaenous Category
        Column # 10   [ OTHR= Oxygen (ml/l) at the surface ]

    Temperatures Category
        Column # 6   [ TEMP= Temperature (C) at the surface ]

    Salinities Category
        Column # 8   [ PSAL= Salinity () at the surface ]

    Chlorophyll/Pigments Category
        Column # 20   [ CHLA= Chlorophyll (ug/L) at the surface ]

DATA SORTED BY GROUPING SETS:

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatoms (#/L) at the surface ]
        column # 4     [ ABDT1= Total Dinoflagellates (#/L) at the surface ]


DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1989 2018
DATES in Column 3 no problems detected 1989 2018
DATES in Column 5 no problems detected 1987 2018
DATES in Column 7 no problems detected 1988 2018
DATES in Column 9 no problems detected 2002 2018
DATES in Column 11 no problems detected 2002 2018
DATES in Column 13 no problems detected 2002 2018
DATES in Column 15 no problems detected 2002 2018
DATES in Column 17 no problems detected 2002 2018
DATES in Column 19 no problems detected 2002 2018

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1989 2018 01 12 01 31
3 DATE-YMD DATE-YMD yes 1989 2018 01 12 01 31
5 DATE-YMD DATE-YMD yes 1987 2018 01 12 01 31
7 DATE-YMD DATE-YMD yes 1988 2018 01 12 01 31
9 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
11 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
13 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
15 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
17 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31
19 DATE-YMD DATE-YMD yes 2002 2018 01 12 01 31


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatoms (#/L) at the surface ] 		no problems detected 322 200. 28266000. 322
( 100%)		 322
( 100%)
Column 4 :
[ 05_ABDT1= Total Dinoflagellates (#/L) at the surface ] 		no problems detected 310 80. 1398600. 287
( 92%)		 287
( 92%)
Column 6 :
[ 06_TEMP= Temperature (C) at the surface ] 		no problems detected 1205 4.78999996 21.75 1205
( 100%)		 1205
( 100%)
Column 8 :
[ 07_PSAL= Salinity () at the surface ] 		no problems detected 688 21.2000008 37. 688
( 100%)		 688
( 100%)
Column 10 :
[ 08_OTHR= Oxygen (ml/l) at the surface ] 		no problems detected 446 3.74000001 21.9099998 446
( 100%)		 446
( 100%)
Column 12 :
[ 09_LOTH= NO3+NO2 (uM) at the surface ] 		no problems detected 365 0.129999995 175.100006 365
( 100%)		 360
( 98%)
Column 14 :
[ 10_LOTH= NH4 (uM) at the surface ] 		no problems detected 369 0.00499999989 10.96 369
( 100%)		 198
( 53%)
Column 16 :
[ 11_LOTH= PO4 (uM) at the surface ] 		no problems detected 366 0.0399999991 4.51000023 366
( 100%)		 80
( 21%)
Column 18 :
[ 12_LOTH= SiO4 (uM) at the surface ] 		no problems detected 368 0.159999996 77.8799973 368
( 100%)		 329
( 89%)
Column 20 :
[ 13_CHLA= Chlorophyll (ug/L) at the surface ] 		no problems detected 512 0.0790000036 70.6800003 512
( 100%)		 352
( 68%)

The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".