COPEPODITE Incoming Data Review Fatal Format Issues:   none HEADER REVIEW SECTION [ Jump back to TOP ] SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS Column # 1     [ DATE-YMD ]       Date Set = 1 Column # 2    [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 ) Column # 3    [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 ) Column # 4    [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 ) Column # 5    [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 ) Column # 6    [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 ) Column # 7    [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 ) Column # 8    [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 ) Column # 9    [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 ) Column # 10    [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 ) Column # 11    [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 ) Column # 12    [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 ) Column # 13    [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 ) Column # 14    [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 ) Column # 15    [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 ) Column # 16     [ DATE-YMD ]       Date Set = 2 Column # 17    [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 ) Column # 18    [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 ) Column # 19    [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 ) Column # 20    [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 ) Column # 21    [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 ) Column # 22    [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 ) Column # 23    [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 ) Column # 24    [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 ) Column # 25    [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 ) Column # 26    [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 ) Column # 27    [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 ) Column # 28    [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 ) Column # 29    [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 ) Column # 30    [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 ) Column # 31     [ DATE-YMD ]       Date Set = 3 Column # 32    [TEMP= Temperature ( C )]      ( date set 3 ) Column # 33    [PSAL= Salinity (PSS)]      ( date set 3 ) Column # 34    [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 ) Column # 35    [OTHR= Oxygen (mg/L)]      ( date set 3 ) Column # 36    [LOTH= NO3NO2 (uM)]      ( date set 3 ) Column # 37    [LOTH= NH4 (uM)]      ( date set 3 ) Column # 38    [LOTH= Nitrite (uM)]      ( date set 3 ) Column # 39    [LOTH= Nitrate (uM)]      ( date set 3 ) Column # 40    [LOTH= Phosphate (uM)]      ( date set 3 ) Column # 41    [LOTH= Silicate (uM)]      ( date set 3 ) Column # 42    [LOTH= Total Nitrogen (uM)]      ( date set 3 ) Column # 43    [LOTH= Total Phosphorus (uM)]      ( date set 3 ) Column # 44    [OTHR= Suspended Solids (mg/L)]      ( date set 3 ) Column # 45    [LOTH= Turbidity (FTU)]      ( date set 3 ) DATA SORTED BY CATEGORY TYPES Total Biomass Category     Column # 17   [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]     Column # 18   [ BIOM2= Total Dinophyceae (ug/l) at the surface ]     Column # 19   [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]     Column # 20   [ BIOM2= Total Litostomatea (ug/l) at the surface ]     Column # 21   [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]     Column # 22   [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]     Column # 23   [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]     Column # 24   [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]     Column # 25   [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]     Column # 26   [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]     Column # 27   [ BIOM2= Total Nanoplankton (ug/l) at the surface ]     Column # 28   [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]     Column # 29   [ BIOM2= Total Spirotrichea (ug/l) at the surface ]     Column # 30   [ BIOM2= Total Unidentified (ug/l) at the surface ] Abundance (with zeros) Category     Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]     Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]     Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]     Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]     Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]     Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]     Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]     Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]     Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]     Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]     Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]     Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]     Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]     Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ] Log10 (logarithmic) Miscellaenous Category     Column # 36   [ LOTH= NO3NO2 (uM) ]     Column # 37   [ LOTH= NH4 (uM) ]     Column # 38   [ LOTH= Nitrite (uM) ]     Column # 39   [ LOTH= Nitrate (uM) ]     Column # 40   [ LOTH= Phosphate (uM) ]     Column # 41   [ LOTH= Silicate (uM) ]     Column # 42   [ LOTH= Total Nitrogen (uM) ]     Column # 43   [ LOTH= Total Phosphorus (uM) ]     Column # 45   [ LOTH= Turbidity (FTU) ] non-Log10 (linear) Miscellaenous Category     Column # 35   [ OTHR= Oxygen (mg/L) ]     Column # 44   [ OTHR= Suspended Solids (mg/L) ] Temperatures Category     Column # 32   [ TEMP= Temperature ( C ) ] Salinities Category     Column # 33   [ PSAL= Salinity (PSS) ] Chlorophyll/Pigments Category     Column # 34   [ CHLA= Chlorophyll-a (ug/L) ] DATA SORTED BY GROUPING SETS: Category 1 Group # 2     column # 17     [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]     column # 18     [ BIOM2= Total Dinophyceae (ug/l) at the surface ]     column # 19     [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]     column # 20     [ BIOM2= Total Litostomatea (ug/l) at the surface ]     column # 21     [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]     column # 22     [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]     column # 23     [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]     column # 24     [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]     column # 25     [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]     column # 26     [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]     column # 27     [ BIOM2= Total Nanoplankton (ug/l) at the surface ]     column # 28     [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]     column # 29     [ BIOM2= Total Spirotrichea (ug/l) at the surface ]     column # 30     [ BIOM2= Total Unidentified (ug/l) at the surface ] Category 8 Group # 1     column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]     column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]     column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]     column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]     column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]     column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]     column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]     column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]     column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]     column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]     column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]     column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]     column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]     column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ] DATE REVIEW SECTION [ Jump back to TOP ] DATE COLUMN Comments Minimum Year Maximum Year DATES in Column 1 no problems detected 1981 1997 DATES in Column 16 no problems detected 1981 1997 DATES in Column 31 no problems detected 1981 2010   Date Column Labeling Date Value-Set1 Date Value-Set2 Date Value-Set3 DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max 1 DATE-YMD DATE-YMD yes 1981 1997 01 11 01 30 16 DATE-YMD DATE-YMD yes 1981 1997 01 11 01 30 31 DATE-YMD DATE-YMD yes 1981 2010 01 11 01 31 DATA REVIEW SECTION [ Jump back to TOP ] DATA COLUMN Comments "n" Minimum (non-zero) Maximum Values > 0 Values > 1 Column 2 : [ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ] no problems detected 103 95. 723636.188 103 ( 100%) 103 ( 100%) Column 3 : [ 05_ABDT1= Total Dinophyceae (#/l) at the surface ] no problems detected 105 223.529404 725920. 105 ( 100%) 105 ( 100%) Column 4 : [ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ] no problems detected 101 6000. 2287600. 101 ( 100%) 101 ( 100%) Column 5 : [ 07_ABDT1= Total Litostomatea (#/l) at the surface ] no problems detected 41 40. 6071. 41 ( 100%) 41 ( 100%) Column 6 : [ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ] no problems detected 78 40. 823620. 78 ( 100%) 78 ( 100%) Column 7 : [ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ] no problems detected 51 160. 73156528. 51 ( 100%) 51 ( 100%) Column 8 : [ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ] no problems detected 29 40. 881270. 29 ( 100%) 29 ( 100%) Column 9 : [ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ] no problems detected 21 280. 5082740. 21 ( 100%) 21 ( 100%) Column 10 : [ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ] no problems detected 26 435. 307083. 26 ( 100%) 26 ( 100%) Column 11 : [ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ] no problems detected 27 40. 219425. 27 ( 100%) 27 ( 100%) Column 12 : [ 14_ABDT1= Total Nanoplankton (#/l) at the surface ] no problems detected 106 56990. 7968473.5 106 ( 100%) 106 ( 100%) Column 13 : [15_ABDT1= Total Raphidophyceae (#/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 14 : [16_ABDT1= Total Spirotrichea (#/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 15 : [ 17_ABDT1= Total Unidentified (#/l) at the surface ] no problems detected 13 1882. 1836250. 13 ( 100%) 13 ( 100%) Column 17 : [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ] no problems detected 103 0.0129000004 34.7695999 103 ( 100%) 61 ( 59%) Column 18 : [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ] no problems detected 105 0.139500007 59.9636002 105 ( 100%) 85 ( 80%) Column 19 : [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ] no problems detected 101 0.0566000007 88.0223999 101 ( 100%) 55 ( 54%) Column 20 : [21_BIOM2= Total Litostomatea (ug/l) at the surface ] There is/are 1 count WARNING(S)! Some of your values are zero or "one". Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 41 0.00340000005 2.79870009 41 ( 100%) 4 ( 9%) Column 21 : [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ] no problems detected 78 0.00319999992 73.0398026 78 ( 100%) 17 ( 21%) Column 22 : [ 23_BIOM2= Total Chlorophyceae (ug/l) at the surface ] no problems detected 51 0.00300000003 21.9470005 51 ( 100%) 39 ( 76%) Column 23 : [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ] no problems detected 29 0.00850000046 9.20320034 29 ( 100%) 7 ( 24%) Column 24 : [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ] no problems detected 21 0.0161000006 45.7447014 21 ( 100%) 8 ( 38%) Column 25 : [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ] no problems detected 26 0.0183000006 2.32369995 26 ( 100%) 8 ( 30%) Column 26 : [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ] no problems detected 27 0.00260000001 41.6907997 27 ( 100%) 6 ( 22%) Column 27 : [ 28_BIOM2= Total Nanoplankton (ug/l) at the surface ] no problems detected 106 0.181799993 383.411011 106 ( 100%) 105 ( 99%) Column 28 : [29_BIOM2= Total Raphidophyceae (ug/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 29 : [30_BIOM2= Total Spirotrichea (ug/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 30 : [ 31_BIOM2= Total Unidentified (ug/l) at the surface ] no problems detected 12 0.0272000004 161.589996 12 ( 100%) 6 ( 50%) Column 32 : [ 32_TEMP= Temperature ( C ) ] no problems detected 194 2.47429991 15.8708 194 ( 100%) 194 ( 100%) Column 33 : [ 33_PSAL= Salinity (PSS) ] no problems detected 192 19.6702995 32.8400002 192 ( 100%) 192 ( 100%) Column 34 : [ 34_CHLA= Chlorophyll-a (ug/L) ] no problems detected 188 0.333299994 17.7999992 188 ( 100%) 137 ( 72%) Column 35 : [ 35_OTHR= Oxygen (mg/L) ] no problems detected 190 3.47000003 15.9507999 190 ( 100%) 190 ( 100%) Column 36 : [36_LOTH= NO3NO2 (uM) ] There is/are 1 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 37 : [ 37_LOTH= NH4 (uM) ] no problems detected 186 0.00669999979 1.95000005 149 ( 80%) 15 ( 8%) Column 38 : [ 38_LOTH= Nitrite (uM) ] no problems detected 191 -0.0163000003 0.620000005 135 ( 70%) 0 ( 0%) Column 39 : [ 39_LOTH= Nitrate (uM) ] no problems detected 191 -0.0533000007 11.6000004 157 ( 82%) 56 ( 29%) Column 40 : [ 40_LOTH= Phosphate (uM) ] no problems detected 191 0.00329999998 0.889999986 168 ( 87%) 0 ( 0%) Column 41 : [ 41_LOTH= Silicate (uM) ] no problems detected 179 0.0399999991 16.2800007 172 ( 96%) 126 ( 70%) Column 42 : [ 42_LOTH= Total Nitrogen (uM) ] no problems detected 56 12.2033005 28.4099998 56 ( 100%) 56 ( 100%) Column 43 : [ 43_LOTH= Total Phosphorus (uM) ] no problems detected 172 0.209999993 2.90499997 172 ( 100%) 41 ( 23%) Column 44 : [44_OTHR= Suspended Solids (mg/L) ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 45 : [ 45_LOTH= Turbidity (FTU) ] no problems detected 40 3.76990008 271.046204 40 ( 100%) 40 ( 100%) The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".