COPEPODITE Incoming Data Review
Fatal Format Issues:   none


HEADER REVIEW SECTION
[ Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2    [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 )
    Column # 3    [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 4    [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 )
    Column # 5    [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 )
    Column # 6    [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 )
    Column # 7    [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 )
    Column # 8    [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 )
    Column # 9    [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 )
    Column # 10    [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 11    [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 )
    Column # 12    [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 )
    Column # 13    [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 )
    Column # 14    [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 )
    Column # 15    [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 )

    Column # 16     [ DATE-YMD ]       Date Set = 2
    Column # 17    [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 18    [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 19    [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 20    [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 )
    Column # 21    [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 22    [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 23    [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 24    [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 25    [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 26    [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 27    [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 )
    Column # 28    [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 29    [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 )
    Column # 30    [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 )

    Column # 31     [ DATE-YMD ]       Date Set = 3
    Column # 32    [TEMP= Temperature ( C )]      ( date set 3 )
    Column # 33    [PSAL= Salinity (PSS)]      ( date set 3 )
    Column # 34    [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 )
    Column # 35    [OTHR= Oxygen (mg/L)]      ( date set 3 )
    Column # 36    [LOTH= NO3NO2 (uM)]      ( date set 3 )
    Column # 37    [LOTH= NH4 (uM)]      ( date set 3 )
    Column # 38    [LOTH= Nitrite (uM)]      ( date set 3 )
    Column # 39    [LOTH= Nitrate (uM)]      ( date set 3 )
    Column # 40    [LOTH= Phosphate (uM)]      ( date set 3 )
    Column # 41    [LOTH= Silicate (uM)]      ( date set 3 )
    Column # 42    [LOTH= Total Nitrogen (uM)]      ( date set 3 )
    Column # 43    [LOTH= Total Phosphorus (uM)]      ( date set 3 )
    Column # 44    [OTHR= Suspended Solids (mg/L)]      ( date set 3 )
    Column # 45    [LOTH= Turbidity (FTU)]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    Total Biomass Category
        Column # 17   [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        Column # 18   [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        Column # 19   [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        Column # 20   [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        Column # 21   [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        Column # 22   [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        Column # 23   [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        Column # 24   [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        Column # 25   [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        Column # 26   [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        Column # 27   [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        Column # 28   [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        Column # 29   [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        Column # 30   [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]
        Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ]

    Log10 (logarithmic) Miscellaenous Category
        Column # 36   [ LOTH= NO3NO2 (uM) ]
        Column # 37   [ LOTH= NH4 (uM) ]
        Column # 38   [ LOTH= Nitrite (uM) ]
        Column # 39   [ LOTH= Nitrate (uM) ]
        Column # 40   [ LOTH= Phosphate (uM) ]
        Column # 41   [ LOTH= Silicate (uM) ]
        Column # 42   [ LOTH= Total Nitrogen (uM) ]
        Column # 43   [ LOTH= Total Phosphorus (uM) ]
        Column # 45   [ LOTH= Turbidity (FTU) ]

    non-Log10 (linear) Miscellaenous Category
        Column # 35   [ OTHR= Oxygen (mg/L) ]
        Column # 44   [ OTHR= Suspended Solids (mg/L) ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature ( C ) ]

    Salinities Category
        Column # 33   [ PSAL= Salinity (PSS) ]

    Chlorophyll/Pigments Category
        Column # 34   [ CHLA= Chlorophyll-a (ug/L) ]

DATA SORTED BY GROUPING SETS:

    Category 1 Group # 2
        column # 17     [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]
        column # 18     [ BIOM2= Total Dinophyceae (ug/l) at the surface ]
        column # 19     [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]
        column # 20     [ BIOM2= Total Litostomatea (ug/l) at the surface ]
        column # 21     [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]
        column # 22     [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]
        column # 23     [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]
        column # 24     [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
        column # 25     [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]
        column # 26     [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]
        column # 27     [ BIOM2= Total Nanoplankton (ug/l) at the surface ]
        column # 28     [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]
        column # 29     [ BIOM2= Total Spirotrichea (ug/l) at the surface ]
        column # 30     [ BIOM2= Total Unidentified (ug/l) at the surface ]

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]
        column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ]


DATE REVIEW SECTION
[ Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1981 2012
DATES in Column 16 no problems detected 1981 2012
DATES in Column 31 no problems detected 1981 2012

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1981 2012 01 12 01 31
16 DATE-YMD DATE-YMD yes 1981 2012 01 12 01 31
31 DATE-YMD DATE-YMD yes 1981 2012 01 12 01 31


DATA REVIEW SECTION
[ Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)		 Maximum Values
> 0 		Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ] 		no problems detected 346 60. 1848931.25 346
( 100%)		 346
( 100%)
Column 3 :
[ 05_ABDT1= Total Dinophyceae (#/l) at the surface ] 		no problems detected 346 20. 332256.25 346
( 100%)		 346
( 100%)
Column 4 :
[ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ] 		no problems detected 327 3260. 6494473. 327
( 100%)		 327
( 100%)
Column 5 :
[ 07_ABDT1= Total Litostomatea (#/l) at the surface ] 		no problems detected 241 1. 19409.4434 241
( 100%)		 239
( 99%)
Column 6 :
[ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ] 		no problems detected 245 20. 1294241.88 245
( 100%)		 245
( 100%)
Column 7 :
[ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ] 		no problems detected 64 160. 50182400. 64
( 100%)		 64
( 100%)
Column 8 :
[ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ] 		no problems detected 95 20. 21301230. 95
( 100%)		 95
( 100%)
Column 9 :
[ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ] 		no problems detected 154 160. 10817699. 154
( 100%)		 154
( 100%)
Column 10 :
[ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ] 		no problems detected 67 640. 530929.188 67
( 100%)		 67
( 100%)
Column 11 :
[ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ] 		no problems detected 50 20. 21878.9492 50
( 100%)		 50
( 100%)
Column 12 :
[ 14_ABDT1= Total Nanoplankton (#/l) at the surface ] 		no problems detected 104 101760. 8720113. 104
( 100%)		 104
( 100%)
Column 13 :
[ 15_ABDT1= Total Raphidophyceae (#/l) at the surface ] 		no problems detected 46 8. 1282878.62 46
( 100%)		 46
( 100%)
Column 14 :
[16_ABDT1= Total Spirotrichea (#/l) at the surface ] 		There is/are 3 count WARNING(S)!

All/most of your values are EMPTY (missing).
This variable will be ignored!

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  5 100. 810.331421 5
    ( 100%)    		 5
    ( 100%)
    Column 15 :
    [ 17_ABDT1= Total Unidentified (#/l) at the surface ]     		no problems detected 248 7345. 7759734. 248
    ( 100%)    		 248
    ( 100%)
    Column 17 :
    [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ]     		no problems detected 346 0.0168999992 112.2369 346
    ( 100%)    		 246
    ( 71%)
    Column 18 :
    [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ]     		no problems detected 346 0.0667999983 108.808899 346
    ( 100%)    		 257
    ( 74%)
    Column 19 :
    [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ]     		no problems detected 327 0.0187999997 73.3988037 327
    ( 100%)    		 133
    ( 40%)
    Column 20 :
    [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ]     		no problems detected 241 0.0046000001 53.4500999 241
    ( 100%)    		 63
    ( 26%)
    Column 21 :
    [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ]     		no problems detected 245 0.00939999986 449.407196 245
    ( 100%)    		 83
    ( 33%)
    Column 22 :
    [ 23_BIOM2= Total Chlorophyceae (ug/l) at the surface ]     		no problems detected 64 0.00270000007 20.073 64
    ( 100%)    		 36
    ( 56%)
    Column 23 :
    [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ]     		no problems detected 94 0.00510000018 28.5128002 94
    ( 100%)    		 24
    ( 25%)
    Column 24 :
    [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]     		no problems detected 154 0.000199999995 64.4861984 154
    ( 100%)    		 94
    ( 61%)
    Column 25 :
    [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ]     		no problems detected 67 0.0269000009 6.60510015 67
    ( 100%)    		 20
    ( 29%)
    Column 26 :
    [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ]     		no problems detected 50 0.000699999975 15.1969004 50
    ( 100%)    		 7
    ( 14%)
    Column 27 :
    [ 28_BIOM2= Total Nanoplankton (ug/l) at the surface ]     		no problems detected 104 0.518299997 70.8556976 104
    ( 100%)    		 103
    ( 99%)
    Column 28 :
    [ 29_BIOM2= Total Raphidophyceae (ug/l) at the surface ]     		no problems detected 46 0.0013 232.009003 46
    ( 100%)    		 26
    ( 56%)
    Column 29 :
    [30_BIOM2= Total Spirotrichea (ug/l) at the surface ]     		There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  5 0.105499998 2.17149997 5
    ( 100%)    		 1
    ( 20%)
    Column 30 :
    [ 31_BIOM2= Total Unidentified (ug/l) at the surface ]     		no problems detected 247 0.0627000034 95.2586975 247
    ( 100%)    		 219
    ( 88%)
    Column 32 :
    [ 32_TEMP= Temperature ( C ) ]     		no problems detected 509 -0.932699978 20.4592991 506
    ( 99%)    		 500
    ( 98%)
    Column 33 :
    [ 33_PSAL= Salinity (PSS) ]     		no problems detected 508 17.4333 31.0387001 508
    ( 100%)    		 508
    ( 100%)
    Column 34 :
    [ 34_CHLA= Chlorophyll-a (ug/L) ]     		no problems detected 417 0.300000012 29.9032993 417
    ( 100%)    		 313
    ( 75%)
    Column 35 :
    [ 35_OTHR= Oxygen (mg/L) ]     		no problems detected 495 3.38439989 13.7503996 495
    ( 100%)    		 495
    ( 100%)
    Column 36 :
    [ 36_LOTH= NO3NO2 (uM) ]     		no problems detected 323 0.0151000004 11.4286003 322
    ( 99%)    		 96
    ( 29%)
    Column 37 :
    [ 37_LOTH= NH4 (uM) ]     		no problems detected 499 0.00329999998 3.54290009 469
    ( 93%)    		 38
    ( 7%)
    Column 38 :
    [ 38_LOTH= Nitrite (uM) ]     		no problems detected 317 -0.00999999978 0.785700023 286
    ( 90%)    		 0
    ( 0%)
    Column 39 :
    [ 39_LOTH= Nitrate (uM) ]     		no problems detected 317 -0.00329999998 12.5466995 300
    ( 94%)    		 113
    ( 35%)
    Column 40 :
    [ 40_LOTH= Phosphate (uM) ]     		no problems detected 507 0.00669999979 0.899999976 499
    ( 98%)    		 0
    ( 0%)
    Column 41 :
    [ 41_LOTH= Silicate (uM) ]     		no problems detected 494 0.0166999996 16.9200001 492
    ( 99%)    		 388
    ( 78%)
    Column 42 :
    [ 42_LOTH= Total Nitrogen (uM) ]     		no problems detected 377 5. 46.3050003 377
    ( 100%)    		 377
    ( 100%)
    Column 43 :
    [ 43_LOTH= Total Phosphorus (uM) ]     		no problems detected 490 0.196799994 5.48330021 490
    ( 100%)    		 73
    ( 14%)
    Column 44 :
    [44_OTHR= Suspended Solids (mg/L) ]     		There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

    		•  2 2.5 5.94999981 2
    ( 100%)    		 2
    ( 100%)
    Column 45 :
    [ 45_LOTH= Turbidity (FTU) ]     		no problems detected 41 7.40450001 1483.81445 41
    ( 100%)    		 41
    ( 100%)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".