COPEPODITE Incoming Data Review Fatal Format Issues:   none HEADER REVIEW SECTION [ Jump back to TOP ] SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS Column # 1     [ DATE-YMD ]       Date Set = 1 Column # 2    [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 ) Column # 3    [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 ) Column # 4    [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 ) Column # 5    [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 ) Column # 6    [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 ) Column # 7    [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 ) Column # 8    [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 ) Column # 9    [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 ) Column # 10    [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 ) Column # 11    [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 ) Column # 12    [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 ) Column # 13    [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 ) Column # 14    [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 ) Column # 15    [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 ) Column # 16     [ DATE-YMD ]       Date Set = 2 Column # 17    [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 ) Column # 18    [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 ) Column # 19    [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 ) Column # 20    [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 ) Column # 21    [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 ) Column # 22    [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 ) Column # 23    [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 ) Column # 24    [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 ) Column # 25    [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 ) Column # 26    [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 ) Column # 27    [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 ) Column # 28    [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 ) Column # 29    [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 ) Column # 30    [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 ) Column # 31     [ DATE-YMD ]       Date Set = 3 Column # 32    [TEMP= Temperature ( C )]      ( date set 3 ) Column # 33    [PSAL= Salinity (PSS)]      ( date set 3 ) Column # 34    [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 ) Column # 35    [OTHR= Oxygen (mg/L)]      ( date set 3 ) Column # 36    [LOTH= NO3NO2 (uM)]      ( date set 3 ) Column # 37    [LOTH= NH4 (uM)]      ( date set 3 ) Column # 38    [LOTH= Nitrite (uM)]      ( date set 3 ) Column # 39    [LOTH= Nitrate (uM)]      ( date set 3 ) Column # 40    [LOTH= Phosphate (uM)]      ( date set 3 ) Column # 41    [LOTH= Silicate (uM)]      ( date set 3 ) Column # 42    [LOTH= Total Nitrogen (uM)]      ( date set 3 ) Column # 43    [LOTH= Total Phosphorus (uM)]      ( date set 3 ) Column # 44    [OTHR= Suspended Solids (mg/L)]      ( date set 3 ) Column # 45    [LOTH= Turbidity (FTU)]      ( date set 3 ) DATA SORTED BY CATEGORY TYPES Total Biomass Category     Column # 17   [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]     Column # 18   [ BIOM2= Total Dinophyceae (ug/l) at the surface ]     Column # 19   [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]     Column # 20   [ BIOM2= Total Litostomatea (ug/l) at the surface ]     Column # 21   [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]     Column # 22   [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]     Column # 23   [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]     Column # 24   [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]     Column # 25   [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]     Column # 26   [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]     Column # 27   [ BIOM2= Total Nanoplankton (ug/l) at the surface ]     Column # 28   [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]     Column # 29   [ BIOM2= Total Spirotrichea (ug/l) at the surface ]     Column # 30   [ BIOM2= Total Unidentified (ug/l) at the surface ] Abundance (with zeros) Category     Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]     Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]     Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]     Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]     Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]     Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]     Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]     Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]     Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]     Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]     Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]     Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]     Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]     Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ] Log10 (logarithmic) Miscellaenous Category     Column # 36   [ LOTH= NO3NO2 (uM) ]     Column # 37   [ LOTH= NH4 (uM) ]     Column # 38   [ LOTH= Nitrite (uM) ]     Column # 39   [ LOTH= Nitrate (uM) ]     Column # 40   [ LOTH= Phosphate (uM) ]     Column # 41   [ LOTH= Silicate (uM) ]     Column # 42   [ LOTH= Total Nitrogen (uM) ]     Column # 43   [ LOTH= Total Phosphorus (uM) ]     Column # 45   [ LOTH= Turbidity (FTU) ] non-Log10 (linear) Miscellaenous Category     Column # 35   [ OTHR= Oxygen (mg/L) ]     Column # 44   [ OTHR= Suspended Solids (mg/L) ] Temperatures Category     Column # 32   [ TEMP= Temperature ( C ) ] Salinities Category     Column # 33   [ PSAL= Salinity (PSS) ] Chlorophyll/Pigments Category     Column # 34   [ CHLA= Chlorophyll-a (ug/L) ] DATA SORTED BY GROUPING SETS: Category 1 Group # 2     column # 17     [ BIOM2= Total Diatomophyceae (ug/l) at the surface ]     column # 18     [ BIOM2= Total Dinophyceae (ug/l) at the surface ]     column # 19     [ BIOM2= Total Cryptophyceae (ug/l) at the surface ]     column # 20     [ BIOM2= Total Litostomatea (ug/l) at the surface ]     column # 21     [ BIOM2= Total Chrysophyceae (ug/l) at the surface ]     column # 22     [ BIOM2= Total Chlorophyceae (ug/l) at the surface ]     column # 23     [ BIOM2= Total Nostocophyceae (ug/l) at the surface ]     column # 24     [ BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]     column # 25     [ BIOM2= Total Prasinophyceae (ug/l) at the surface ]     column # 26     [ BIOM2= Total Euglenophyceae (ug/l) at the surface ]     column # 27     [ BIOM2= Total Nanoplankton (ug/l) at the surface ]     column # 28     [ BIOM2= Total Raphidophyceae (ug/l) at the surface ]     column # 29     [ BIOM2= Total Spirotrichea (ug/l) at the surface ]     column # 30     [ BIOM2= Total Unidentified (ug/l) at the surface ] Category 8 Group # 1     column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]     column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]     column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]     column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]     column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]     column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]     column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]     column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]     column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]     column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]     column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]     column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]     column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]     column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ] DATE REVIEW SECTION [ Jump back to TOP ] DATE COLUMN Comments Minimum Year Maximum Year DATES in Column 1 no problems detected 1998 2010 DATES in Column 16 no problems detected 1998 2010 DATES in Column 31 no problems detected 1983 2012   Date Column Labeling Date Value-Set1 Date Value-Set2 Date Value-Set3 DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max 1 DATE-YMD DATE-YMD yes 1998 2010 01 12 01 31 16 DATE-YMD DATE-YMD yes 1998 2010 01 12 01 31 31 DATE-YMD DATE-YMD yes 1983 2012 01 12 01 31 DATA REVIEW SECTION [ Jump back to TOP ] DATA COLUMN Comments "n" Minimum (non-zero) Maximum Values > 0 Values > 1 Column 2 : [ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ] no problems detected 283 412.066498 16624915. 283 ( 100%) 283 ( 100%) Column 3 : [ 05_ABDT1= Total Dinophyceae (#/l) at the surface ] no problems detected 255 199.996002 11326070. 255 ( 100%) 255 ( 100%) Column 4 : [ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ] no problems detected 276 200. 6368052.5 276 ( 100%) 276 ( 100%) Column 5 : [ 07_ABDT1= Total Litostomatea (#/l) at the surface ] no problems detected 148 100. 149101.203 148 ( 100%) 148 ( 100%) Column 6 : [ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ] no problems detected 36 799.985229 1516942.88 36 ( 100%) 36 ( 100%) Column 7 : [ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ] no problems detected 282 1000. 1.01865254E+09 282 ( 100%) 282 ( 100%) Column 8 : [ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ] no problems detected 196 100. 1.04354483E+09 196 ( 100%) 196 ( 100%) Column 9 : [ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ] no problems detected 30 37800. 6056075. 30 ( 100%) 30 ( 100%) Column 10 : [ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ] no problems detected 100 3293.61035 9457191. 100 ( 100%) 100 ( 100%) Column 11 : [ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ] no problems detected 55 199.996002 707055.812 55 ( 100%) 55 ( 100%) Column 12 : [14_ABDT1= Total Nanoplankton (#/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 5 24249.2051 10015270. 5 ( 100%) 5 ( 100%) Column 13 : [15_ABDT1= Total Raphidophyceae (#/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 1 37200. 37200. 1 ( 100%) 1 ( 100%) Column 14 : [16_ABDT1= Total Spirotrichea (#/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 15 : [ 17_ABDT1= Total Unidentified (#/l) at the surface ] no problems detected 260 7600. 174949056. 260 ( 100%) 260 ( 100%) Column 17 : [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ] no problems detected 265 0.0969000012 179.507797 265 ( 100%) 194 ( 73%) Column 18 : [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ] no problems detected 236 0.0124000004 1963.4751 236 ( 100%) 131 ( 55%) Column 19 : [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ] no problems detected 258 0.00749999983 111.410004 258 ( 100%) 214 ( 82%) Column 20 : [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ] no problems detected 136 0.0252999999 47.8814011 136 ( 100%) 49 ( 36%) Column 21 : [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ] no problems detected 33 0.0115 27.8271999 33 ( 100%) 11 ( 33%) Column 22 : [ 23_BIOM2= Total Chlorophyceae (ug/l) at the surface ] no problems detected 264 0.0132999998 239.1315 264 ( 100%) 203 ( 76%) Column 23 : [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ] no problems detected 182 0.00999999978 156.705307 182 ( 100%) 103 ( 56%) Column 24 : [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ] no problems detected 30 0.137799993 22.3234997 30 ( 100%) 10 ( 33%) Column 25 : [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ] no problems detected 88 0.0546000004 20.4804993 88 ( 100%) 48 ( 54%) Column 26 : [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ] no problems detected 49 0.00260000001 28.6315994 49 ( 100%) 12 ( 24%) Column 27 : [28_BIOM2= Total Nanoplankton (ug/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 5 1.67939997 14.3285999 5 ( 100%) 5 ( 100%) Column 28 : [29_BIOM2= Total Raphidophyceae (ug/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 1 4.8664999 4.8664999 1 ( 100%) 1 ( 100%) Column 29 : [30_BIOM2= Total Spirotrichea (ug/l) at the surface ] There is/are 3 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 30 : [ 31_BIOM2= Total Unidentified (ug/l) at the surface ] no problems detected 241 0.217700005 976.728577 241 ( 100%) 220 ( 91%) Column 32 : [ 32_TEMP= Temperature ( C ) ] no problems detected 559 -0.116700001 23. 558 ( 99%) 543 ( 97%) Column 33 : [ 33_PSAL= Salinity (PSS) ] no problems detected 559 0.100000001 18.3999996 559 ( 100%) 506 ( 90%) Column 34 : [ 34_CHLA= Chlorophyll-a (ug/L) ] no problems detected 354 0.800000012 110. 354 ( 100%) 353 ( 99%) Column 35 : [ 35_OTHR= Oxygen (mg/L) ] no problems detected 549 5.30000019 16.6000004 549 ( 100%) 549 ( 100%) Column 36 : [ 36_LOTH= NO3NO2 (uM) ] no problems detected 353 0.107100002 250. 353 ( 100%) 286 ( 81%) Column 37 : [ 37_LOTH= NH4 (uM) ] no problems detected 355 0.142900005 22.1429005 355 ( 100%) 173 ( 48%) Column 38 : [38_LOTH= Nitrite (uM) ] There is/are 1 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 39 : [39_LOTH= Nitrate (uM) ] There is/are 1 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) Column 40 : [ 40_LOTH= Phosphate (uM) ] no problems detected 355 0.0322999991 5.74189997 355 ( 100%) 16 ( 4%) Column 41 : [ 41_LOTH= Silicate (uM) ] no problems detected 355 0.35710001 235.714294 355 ( 100%) 353 ( 99%) Column 42 : [ 42_LOTH= Total Nitrogen (uM) ] no problems detected 355 19.2856998 357.142914 355 ( 100%) 355 ( 100%) Column 43 : [ 43_LOTH= Total Phosphorus (uM) ] no problems detected 355 0.451599985 12.2580996 355 ( 100%) 286 ( 80%) Column 44 : [ 44_OTHR= Suspended Solids (mg/L) ] no problems detected 316 1. 150. 316 ( 100%) 315 ( 99%) Column 45 : [45_LOTH= Turbidity (FTU) ] There is/are 1 count WARNING(S)! All/most of your values are EMPTY (missing). This variable will be ignored! Possible warning triggers: a non-numeric value was encountered! text comments like "null" or "n/a" will be ignored. Engineering units ("1.25E5", "1.25 x 10^5") 0 9999999. -9999999. 0 ( -2147483648%) 0 ( -2147483648%) The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".