COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2     [BIOM1= Total Dry Mass (g/m2)]      ( date set 1 )
    Column # 3     [ABDT= ACAlong (g/m2)]      ( date set 1 )
    Column # 4     [ABDT= AETID (g/m2)]      ( date set 1 )
    Column # 5     [ABDT= CALma (g/m2)]      ( date set 1 )
    Column # 6     [ABDT= CALpa (g/m2)]      ( date set 1 )
    Column # 7     [ABDT= CAO (g/m2)]      ( date set 1 )
    Column # 8     [ABDT= CHAETjuv (g/m2)]      ( date set 1 )
    Column # 9     [ABDT= CHAETsouth (g/m2)]      ( date set 1 )
    Column # 10     [ABDT= CIRRIPED (g/m2)]      ( date set 1 )
    Column # 11     [ABDT= CLAUS (g/m2)]      ( date set 1 )
    Column # 12     [ABDT= CLIONE (g/m2)]      ( date set 1 )
    Column # 13     [ABDT= CONCHOEC (g/m2)]      ( date set 1 )
    Column # 14     [ABDT= CORYCAEUS (g/m2)]      ( date set 1 )
    Column # 15     [ABDT= CTENOS (g/m2)]      ( date set 1 )
    Column # 16     [ABDT= CTEva (g/m2)]      ( date set 1 )
    Column # 17     [ABDT= DOLIOLIDS (g/m2)]      ( date set 1 )
    Column # 18     [ABDT= EUAbu (g/m2)]      ( date set 1 )
    Column # 19     [ABDT= EUAca (g/m2)]      ( date set 1 )
    Column # 20     [ABDT= EUCHAETA (g/m2)]      ( date set 1 )
    Column # 21     [ABDT= EUK (g/m2)]      ( date set 1 )
    Column # 22     [ABDT= EuphEGGS (g/m2)]      ( date set 1 )
    Column # 23     [ABDT= EUPHjuvs (g/m2)]      ( date set 1 )
    Column # 24     [ABDT= EUPpa (g/m2)]      ( date set 1 )
    Column # 25     [ABDT= LARVACEA (g/m2)]      ( date set 1 )
    Column # 26     [ABDT= LIMAC (g/m2)]      ( date set 1 )
    Column # 27     [ABDT= MEDUS (g/m2)]      ( date set 1 )
    Column # 28     [ABDT= MESte (g/m2)]      ( date set 1 )
    Column # 29     [ABDT= METpa (g/m2)]      ( date set 1 )
    Column # 30     [ABDT= METps (g/m2)]      ( date set 1 )
    Column # 31     [ABDT= MICROCAL (g/m2)]      ( date set 1 )
    Column # 32     [ABDT= MOLUSClar (g/m2)]      ( date set 1 )
    Column # 33     [ABDT= NEOcr (g/m2)]      ( date set 1 )
    Column # 34     [ABDT= NEOpl (g/m2)]      ( date set 1 )
    Column # 35     [ABDT= OITat (g/m2)]      ( date set 1 )
    Column # 36     [ABDT= OITsi (g/m2)]      ( date set 1 )
    Column # 37     [ABDT= ONCAEA (g/m2)]      ( date set 1 )
    Column # 38     [ABDT= PARACAL (g/m2)]      ( date set 1 )
    Column # 39     [ABDT= PATel (g/m2)]      ( date set 1 )
    Column # 40     [ABDT= PRIMNO (g/m2)]      ( date set 1 )
    Column # 41     [ABDT= PSEUDOCAL (g/m2)]      ( date set 1 )
    Column # 42     [ABDT= PSSsc (g/m2)]      ( date set 1 )
    Column # 43     [ABDT= RACan (g/m2)]      ( date set 1 )
    Column # 44     [ABDT= Remainder (g/m2)]      ( date set 1 )
    Column # 45     [ABDT= SALPS (g/m2)]      ( date set 1 )
    Column # 46     [ABDT= SCOmi (g/m2)]      ( date set 1 )
    Column # 47     [ABDT= SIPHON (g/m2)]      ( date set 1 )
    Column # 48     [ABDT= THEMISTO (g/m2)]      ( date set 1 )
    Column # 49     [ABDT= THYin (g/m2)]      ( date set 1 )
    Column # 50     [ABDT= THYsp (g/m2)]      ( date set 1 )
    Column # 51     [ABDT= TOMOP (g/m2)]      ( date set 1 )


DATA SORTED BY CATEGORY TYPES

    Abundance (with zeros) Category
        Column # 3   [ ABDT= ACAlong (g/m2) ]
        Column # 4   [ ABDT= AETID (g/m2) ]
        Column # 5   [ ABDT= CALma (g/m2) ]
        Column # 6   [ ABDT= CALpa (g/m2) ]
        Column # 7   [ ABDT= CAO (g/m2) ]
        Column # 8   [ ABDT= CHAETjuv (g/m2) ]
        Column # 9   [ ABDT= CHAETsouth (g/m2) ]
        Column # 10   [ ABDT= CIRRIPED (g/m2) ]
        Column # 11   [ ABDT= CLAUS (g/m2) ]
        Column # 12   [ ABDT= CLIONE (g/m2) ]
        Column # 13   [ ABDT= CONCHOEC (g/m2) ]
        Column # 14   [ ABDT= CORYCAEUS (g/m2) ]
        Column # 15   [ ABDT= CTENOS (g/m2) ]
        Column # 16   [ ABDT= CTEva (g/m2) ]
        Column # 17   [ ABDT= DOLIOLIDS (g/m2) ]
        Column # 18   [ ABDT= EUAbu (g/m2) ]
        Column # 19   [ ABDT= EUAca (g/m2) ]
        Column # 20   [ ABDT= EUCHAETA (g/m2) ]
        Column # 21   [ ABDT= EUK (g/m2) ]
        Column # 22   [ ABDT= EuphEGGS (g/m2) ]
        Column # 23   [ ABDT= EUPHjuvs (g/m2) ]
        Column # 24   [ ABDT= EUPpa (g/m2) ]
        Column # 25   [ ABDT= LARVACEA (g/m2) ]
        Column # 26   [ ABDT= LIMAC (g/m2) ]
        Column # 27   [ ABDT= MEDUS (g/m2) ]
        Column # 28   [ ABDT= MESte (g/m2) ]
        Column # 29   [ ABDT= METpa (g/m2) ]
        Column # 30   [ ABDT= METps (g/m2) ]
        Column # 31   [ ABDT= MICROCAL (g/m2) ]
        Column # 32   [ ABDT= MOLUSClar (g/m2) ]
        Column # 33   [ ABDT= NEOcr (g/m2) ]
        Column # 34   [ ABDT= NEOpl (g/m2) ]
        Column # 35   [ ABDT= OITat (g/m2) ]
        Column # 36   [ ABDT= OITsi (g/m2) ]
        Column # 37   [ ABDT= ONCAEA (g/m2) ]
        Column # 38   [ ABDT= PARACAL (g/m2) ]
        Column # 39   [ ABDT= PATel (g/m2) ]
        Column # 40   [ ABDT= PRIMNO (g/m2) ]
        Column # 41   [ ABDT= PSEUDOCAL (g/m2) ]
        Column # 42   [ ABDT= PSSsc (g/m2) ]
        Column # 43   [ ABDT= RACan (g/m2) ]
        Column # 44   [ ABDT= Remainder (g/m2) ]
        Column # 45   [ ABDT= SALPS (g/m2) ]
        Column # 46   [ ABDT= SCOmi (g/m2) ]
        Column # 47   [ ABDT= SIPHON (g/m2) ]
        Column # 48   [ ABDT= THEMISTO (g/m2) ]
        Column # 49   [ ABDT= THYin (g/m2) ]
        Column # 50   [ ABDT= THYsp (g/m2) ]
        Column # 51   [ ABDT= TOMOP (g/m2) ]




DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1979 2010

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1979 2010 1 12 1 31



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_BIOM1= Total Dry Mass (g/m2) ]
no problems detected 714 0.176896915 168.714813 714
( 100 %)
681
( 95 %)
Column 3 :
[05_ABDT= ACAlong (g/m2) ]
There is/are 1 count WARNING(S)!

Some of your values are zero or "one".

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.08287996E-03 1.28045130 530
    ( 74 %)
    1
    ( 0 %)
    Column 4 :
    [06_ABDT= AETID (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.03000004E-03 1.03941691 223
    ( 31 %)
    1
    ( 0 %)
    Column 5 :
    [ 07_ABDT= CALma (g/m2) ]
    no problems detected 714 2.38500000E-03 8.21189022 434
    ( 60 %)
    56
    ( 7 %)
    Column 6 :
    [08_ABDT= CALpa (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.89249997E-03 2.47269011 385
    ( 53 %)
    3
    ( 0 %)
    Column 7 :
    [09_ABDT= CAO (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.02150999E-03 7.43045509E-02 290
    ( 40 %)
    0
    ( 0 %)
    Column 8 :
    [10_ABDT= CHAETjuv (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.23749999E-03 0.565332472 285
    ( 39 %)
    0
    ( 0 %)
    Column 9 :
    [11_ABDT= CHAETsouth (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.17854006E-03 0.849277496 377
    ( 52 %)
    0
    ( 0 %)
    Column 10 :
    [12_ABDT= CIRRIPED (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.44072995E-03 1.79762292 256
    ( 35 %)
    2
    ( 0 %)
    Column 11 :
    [13_ABDT= CLAUS (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.06644002E-03 0.401352167 555
    ( 77 %)
    0
    ( 0 %)
    Column 12 :
    [14_ABDT= CLIONE (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 4.97184694E-03 0.945729971 278
    ( 38 %)
    0
    ( 0 %)
    Column 13 :
    [15_ABDT= CONCHOEC (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.17399998E-03 10.2339706 533
    ( 74 %)
    4
    ( 0 %)
    Column 14 :
    [16_ABDT= CORYCAEUS (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.05066004E-03 3.91360000E-02 205
    ( 28 %)
    0
    ( 0 %)
    Column 15 :
    [17_ABDT= CTENOS (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 3.40785994E-03 4.04280329 194
    ( 27 %)
    4
    ( 0 %)
    Column 16 :
    [18_ABDT= CTEva (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.04919996E-03 0.389068186 373
    ( 52 %)
    0
    ( 0 %)
    Column 17 :
    [ 19_ABDT= DOLIOLIDS (g/m2) ]
    no problems detected 714 1.10800005E-03 9.07850456 264
    ( 36 %)
    11
    ( 1 %)
    Column 18 :
    [20_ABDT= EUAbu (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.34610594E-03 1.63162673 583
    ( 81 %)
    2
    ( 0 %)
    Column 19 :
    [21_ABDT= EUAca (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.82400004E-03 1.31093276 425
    ( 59 %)
    1
    ( 0 %)
    Column 20 :
    [22_ABDT= EUCHAETA (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.78575004E-03 4.71365976 489
    ( 68 %)
    3
    ( 0 %)
    Column 21 :
    [ 23_ABDT= EUK (g/m2) ]
    no problems detected 714 1.59631902E-03 4.73172998 647
    ( 90 %)
    35
    ( 4 %)
    Column 22 :
    [24_ABDT= EuphEGGS (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.01250003E-03 0.479191124 429
    ( 60 %)
    0
    ( 0 %)
    Column 23 :
    [25_ABDT= EUPHjuvs (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.04518095E-03 2.60978007 556
    ( 77 %)
    2
    ( 0 %)
    Column 24 :
    [ 26_ABDT= EUPpa (g/m2) ]
    no problems detected 714 1.65700004E-03 23.4841785 578
    ( 80 %)
    56
    ( 7 %)
    Column 25 :
    [ 27_ABDT= LARVACEA (g/m2) ]
    no problems detected 714 1.11715996E-03 6.09597254 511
    ( 71 %)
    8
    ( 1 %)
    Column 26 :
    [ 28_ABDT= LIMAC (g/m2) ]
    no problems detected 714 1.60149997E-03 5.38699102 549
    ( 76 %)
    35
    ( 4 %)
    Column 27 :
    [ 29_ABDT= MEDUS (g/m2) ]
    no problems detected 714 2.27182009E-03 8.19128704 603
    ( 84 %)
    70
    ( 9 %)
    Column 28 :
    [30_ABDT= MESte (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.17110997E-03 0.305465013 492
    ( 68 %)
    0
    ( 0 %)
    Column 29 :
    [31_ABDT= METpa (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.72625005E-03 1.01415801 516
    ( 72 %)
    1
    ( 0 %)
    Column 30 :
    [32_ABDT= METps (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 3.12500005E-03 1.25440371 242
    ( 33 %)
    2
    ( 0 %)
    Column 31 :
    [33_ABDT= MICROCAL (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.01968006E-03 3.98075990E-02 384
    ( 53 %)
    0
    ( 0 %)
    Column 32 :
    [34_ABDT= MOLUSClar (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.01871998E-03 5.80108874E-02 340
    ( 47 %)
    0
    ( 0 %)
    Column 33 :
    [ 35_ABDT= NEOcr (g/m2) ]
    no problems detected 714 2.63811997E-03 11.7230587 588
    ( 82 %)
    91
    ( 12 %)
    Column 34 :
    [ 36_ABDT= NEOpl (g/m2) ]
    no problems detected 714 1.26850000E-03 28.4490948 313
    ( 43 %)
    73
    ( 10 %)
    Column 35 :
    [37_ABDT= OITat (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.08217006E-03 8.07297975E-02 684
    ( 95 %)
    0
    ( 0 %)
    Column 36 :
    [38_ABDT= OITsi (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.01250003E-03 0.176310942 694
    ( 97 %)
    0
    ( 0 %)
    Column 37 :
    [39_ABDT= ONCAEA (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.00474001E-03 2.07605083E-02 337
    ( 47 %)
    0
    ( 0 %)
    Column 38 :
    [40_ABDT= PARACAL (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.04749994E-03 0.597838223 536
    ( 75 %)
    0
    ( 0 %)
    Column 39 :
    [41_ABDT= PATel (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.37740001E-03 1.79135597 634
    ( 88 %)
    1
    ( 0 %)
    Column 40 :
    [42_ABDT= PRIMNO (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.42750004E-03 0.460687488 256
    ( 35 %)
    0
    ( 0 %)
    Column 41 :
    [ 43_ABDT= PSEUDOCAL (g/m2) ]
    no problems detected 714 1.33375998E-03 3.94224238 679
    ( 95 %)
    13
    ( 1 %)
    Column 42 :
    [ 44_ABDT= PSSsc (g/m2) ]
    no problems detected 714 1.82650005E-03 2.20335197 622
    ( 87 %)
    31
    ( 4 %)
    Column 43 :
    [45_ABDT= RACan (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.43326004E-03 0.271525294 420
    ( 58 %)
    0
    ( 0 %)
    Column 44 :
    [ 46_ABDT= Remainder (g/m2) ]
    no problems detected 714 2.78555998E-03 29.2082996 713
    ( 99 %)
    122
    ( 17 %)
    Column 45 :
    [ 47_ABDT= SALPS (g/m2) ]
    no problems detected 714 2.70750001E-03 5.11164093 137
    ( 19 %)
    11
    ( 1 %)
    Column 46 :
    [48_ABDT= SCOmi (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.04175997E-03 0.114189997 641
    ( 89 %)
    0
    ( 0 %)
    Column 47 :
    [ 49_ABDT= SIPHON (g/m2) ]
    no problems detected 714 1.30200002E-03 3.12331700 519
    ( 72 %)
    6
    ( 0 %)
    Column 48 :
    [50_ABDT= THEMISTO (g/m2) ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 714 1.32000004E-03 2.14952564 519
    ( 72 %)
    2
    ( 0 %)
    Column 49 :
    [ 51_ABDT= THYin (g/m2) ]
    no problems detected 714 2.53250008E-03 1.73346984 432
    ( 60 %)
    7
    ( 0 %)
    Column 50 :
    [ 52_ABDT= THYsp (g/m2) ]
    no problems detected 714 5.37378201E-03 152.400665 288
    ( 40 %)
    65
    ( 9 %)
    Column 51 :
    [ 53_ABDT= TOMOP (g/m2) ]
    no problems detected 714 1.08500000E-03 4.64018393 507
    ( 71 %)
    7
    ( 0 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".