COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2     [ABND1= Total Copepods (#/m3)]      ( date set 1 )
    Column # 3     [ABDT1= Calanidae (#/m3)]      ( date set 1 )
    Column # 4     [ABDT1= Paracalanidae (#/m3)]      ( date set 1 )
    Column # 5     [ABDT1= Acartiidae (#/m3)]      ( date set 1 )
    Column # 6     [ABDT1= Oithonidae (#/m3)]      ( date set 1 )
    Column # 7     [ABDT2= Salpidae (#/m3)]      ( date set 1 )
    Column # 8     [ABDT2= Doliolidae (#/m3)]      ( date set 1 )

    Column # 9     [ DATE-MDY ]       Date Set = 2
    Column # 10     [CHLA= Chlorophyll (mg/m3)]      ( date set 2 )

    Column # 11     [ DATE-YMD ]       Date Set = 3
    Column # 12     [BIOM= Total Dry Mass (mg/m3)]      ( date set 3 )

    Column # 13     [ DATE-YMD ]       Date Set = 4
    Column # 14     [ABDT3= Total Diatoms (#/L)]      ( date set 4 )
    Column # 15     [ABDT3= Total Centric Diatoms (#/L)]      ( date set 4 )
    Column # 16     [ABDT3= Total Pennate Diatoms (#/L)]      ( date set 4 )
    Column # 17     [ABDT4= Total Dinoflagellates (#/L)]      ( date set 4 )
    Column # 18     [ABDT= Total Flagellates (#/L)]      ( date set 4 )
    Column # 19     [ABDT= Total Naked Flagellates (#/L)]      ( date set 4 )
    Column # 20     [ABDT= Total Ciliates (#/L)]      ( date set 4 )
    Column # 21     [ABDT= Total Coccolithophore (#/L)]      ( date set 4 )
    Column # 22     [ABDT= Total Cyanobacteria (#/L)]      ( date set 4 )

    Column # 23     [ DATE-YMD ]       Date Set = 5
    Column # 24     [PSAL= Salinity () at the surface]      ( date set 5 )
    Column # 25     [OTHR= Oxygen (uM) at the surface]      ( date set 5 )
    Column # 26     [LOTH= Silicate (uM) at the surface]      ( date set 5 )
    Column # 27     [LOTH= Nitrate (uM) at the surface]      ( date set 5 )
    Column # 28     [LOTH= Phosphate (uM) at the surface]      ( date set 5 )
    Column # 29     [OTHR= TCO2 (umol/kg) at the surface]      ( date set 5 )
    Column # 30     [OTHR= Total Alkalinity (umol/kg) at the surface]      ( date set 5 )

    Column # 31     [ DATE-YMD ]       Date Set = 6
    Column # 32     [TEMP= Temperature () at the surface]      ( date set 6 )
    Column # 33     [PSAL= Salinity () at the surface]      ( date set 6 )
    Column # 34     [CHLA= Fluorometric Chlorophyll () at the surface]      ( date set 6 )
    Column # 35     [OTHR= Turbidity () at the surface]      ( date set 6 )


DATA SORTED BY CATEGORY TYPES

    Total/non-zero Abundance Category
        Column # 2   [ ABND1= Total Copepods (#/m3) ]

    Abundance (with zeros) Category
        Column # 3   [ ABDT1= Calanidae (#/m3) ]
        Column # 4   [ ABDT1= Paracalanidae (#/m3) ]
        Column # 5   [ ABDT1= Acartiidae (#/m3) ]
        Column # 6   [ ABDT1= Oithonidae (#/m3) ]
        Column # 7   [ ABDT2= Salpidae (#/m3) ]
        Column # 8   [ ABDT2= Doliolidae (#/m3) ]
        Column # 14   [ ABDT3= Total Diatoms (#/L) ]
        Column # 15   [ ABDT3= Total Centric Diatoms (#/L) ]
        Column # 16   [ ABDT3= Total Pennate Diatoms (#/L) ]
        Column # 17   [ ABDT4= Total Dinoflagellates (#/L) ]
        Column # 18   [ ABDT= Total Flagellates (#/L) ]
        Column # 19   [ ABDT= Total Naked Flagellates (#/L) ]
        Column # 20   [ ABDT= Total Ciliates (#/L) ]
        Column # 21   [ ABDT= Total Coccolithophore (#/L) ]
        Column # 22   [ ABDT= Total Cyanobacteria (#/L) ]

    non-Log10 (linear) Miscellaenous Category
        Column # 25   [ OTHR= Oxygen (uM) at the surface ]
        Column # 29   [ OTHR= TCO2 (umol/kg) at the surface ]
        Column # 30   [ OTHR= Total Alkalinity (umol/kg) at the surface ]
        Column # 35   [ OTHR= Turbidity () at the surface ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature () at the surface ]

    Salinities Category
        Column # 24   [ PSAL= Salinity () at the surface ]
        Column # 33   [ PSAL= Salinity () at the surface ]

DATA SORTED BY GROUPING SETS:

    Category 2 Group # 1
        column # 2     [ ABND1= Total Copepods (#/m3) ]

    Category 8 Group # 1
        column # 3     [ ABDT1= Calanidae (#/m3) ]
        column # 4     [ ABDT1= Paracalanidae (#/m3) ]
        column # 5     [ ABDT1= Acartiidae (#/m3) ]
        column # 6     [ ABDT1= Oithonidae (#/m3) ]

    Category 8 Group # 2
        column # 7     [ ABDT2= Salpidae (#/m3) ]
        column # 8     [ ABDT2= Doliolidae (#/m3) ]

    Category 8 Group # 3
        column # 14     [ ABDT3= Total Diatoms (#/L) ]
        column # 15     [ ABDT3= Total Centric Diatoms (#/L) ]
        column # 16     [ ABDT3= Total Pennate Diatoms (#/L) ]

    Category 8 Group # 4
        column # 17     [ ABDT4= Total Dinoflagellates (#/L) ]



DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 2009 2015
DATES in Column 9 no problems detected 2009 2014
DATES in Column 11 no problems detected 2009 2015
DATES in Column 13 no problems detected 2009 2015
DATES in Column 23 no problems detected 2009 2015
DATES in Column 31 no problems detected 2009 2015

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 31
9 DATE-MDY DATE-MDY yes 1 12 1 31 2009 2014
11 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 31
13 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 31
23 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 31
31 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 31



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_ABND1= Total Copepods (#/m3) ]
no problems detected 65 220.642303 11316.2168 55
( 84 %)
55
( 84 %)
Column 3 :
[ 05_ABDT1= Calanidae (#/m3) ]
no problems detected 65 37.4789009 5658.10889 55
( 84 %)
55
( 84 %)
Column 4 :
[ 06_ABDT1= Paracalanidae (#/m3) ]
no problems detected 65 3.84019995 1496.13452 55
( 84 %)
55
( 84 %)
Column 5 :
[ 07_ABDT1= Acartiidae (#/m3) ]
no problems detected 65 0.319999993 231.220795 29
( 44 %)
27
( 41 %)
Column 6 :
[ 08_ABDT1= Oithonidae (#/m3) ]
no problems detected 65 71.9354019 5372.48291 55
( 84 %)
55
( 84 %)
Column 7 :
[ 09_ABDT2= Salpidae (#/m3) ]
no problems detected 65 3.02250004 106.089500 16
( 24 %)
16
( 24 %)
Column 8 :
[ 10_ABDT2= Doliolidae (#/m3) ]
no problems detected 65 0.680100024 54.4048996 19
( 29 %)
18
( 27 %)
Column 10 :
[11_CHLA= Chlorophyll (mg/m3) ]
There is/are 1 count WARNING(S)!

Some of your values are zero or "one".

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 48 6.80000037E-02 2.55900002 48
    ( 100 %)
    1
    ( 2 %)
    Column 12 :
    [ 12_BIOM= Total Dry Mass (mg/m3) ]
    no problems detected 64 1.27849996 191.845200 64
    ( 100 %)
    64
    ( 100 %)
    Column 14 :
    [ 13_ABDT3= Total Diatoms (#/L) ]
    no problems detected 62 108.000000 77812.0000 62
    ( 100 %)
    62
    ( 100 %)
    Column 15 :
    [ 14_ABDT3= Total Centric Diatoms (#/L) ]
    no problems detected 62 10.0000000 71354.0000 62
    ( 100 %)
    62
    ( 100 %)
    Column 16 :
    [ 15_ABDT3= Total Pennate Diatoms (#/L) ]
    no problems detected 62 26.0000000 14233.0000 62
    ( 100 %)
    62
    ( 100 %)
    Column 17 :
    [ 16_ABDT4= Total Dinoflagellates (#/L) ]
    no problems detected 62 10.0000000 4516.00000 62
    ( 100 %)
    62
    ( 100 %)
    Column 18 :
    [17_ABDT= Total Flagellates (#/L) ]
    There is/are 2 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 62 9999999.00 0.00000000 0
    ( 0 %)
    0
    ( 0 %)
    Column 19 :
    [ 18_ABDT= Total Naked Flagellates (#/L) ]
    no problems detected 62 300.000000 50607.0000 46
    ( 74 %)
    46
    ( 74 %)
    Column 20 :
    [ 19_ABDT= Total Ciliates (#/L) ]
    no problems detected 62 20.0000000 1327.00000 34
    ( 54 %)
    34
    ( 54 %)
    Column 21 :
    [20_ABDT= Total Coccolithophore (#/L) ]
    There is/are 2 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 62 184.000000 184.000000 1
    ( 1 %)
    1
    ( 1 %)
    Column 22 :
    [21_ABDT= Total Cyanobacteria (#/L) ]
    There is/are 2 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 62 9999999.00 0.00000000 0
    ( 0 %)
    0
    ( 0 %)
    Column 24 :
    [ 22_PSAL= Salinity () at the surface ]
    no problems detected 68 29.6599998 35.8699989 68
    ( 100 %)
    68
    ( 100 %)
    Column 25 :
    [23_OTHR= Oxygen (uM) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 26 :
    [ 24_LOTH= Silicate (uM) at the surface ]
    no problems detected 69 0.100000001 30.1000004 69
    ( 100 %)
    45
    ( 65 %)
    Column 27 :
    [ 25_LOTH= Nitrate (uM) at the surface ]
    no problems detected 69 0.100000001 0.400000006 20
    ( 28 %)
    0
    ( 0 %)
    Column 28 :
    [ 26_LOTH= Phosphate (uM) at the surface ]
    no problems detected 69 9.99999978E-03 0.289999992 68
    ( 98 %)
    0
    ( 0 %)
    Column 29 :
    [27_OTHR= TCO2 (umol/kg) at the surface ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 69 9.99999978E-03 0.469999999 57
    ( 82 %)
    0
    ( 0 %)
    Column 30 :
    [ 28_OTHR= Total Alkalinity (umol/kg) at the surface ]
    no problems detected 57 1786.19995 2011.03003 57
    ( 100 %)
    57
    ( 100 %)
    Column 32 :
    [ 29_TEMP= Temperature () at the surface ]
    no problems detected 257 21.2823009 30.1039009 257
    ( 100 %)
    257
    ( 100 %)
    Column 33 :
    [ 30_PSAL= Salinity () at the surface ]
    no problems detected 257 29.5086994 35.9403992 257
    ( 100 %)
    257
    ( 100 %)
    Column 34 :
    [ 31_CHLA= Fluorometric Chlorophyll () at the surface ]
    no problems detected 238 3.40000005E-03 7.31839991 238
    ( 100 %)
    15
    ( 6 %)
    Column 35 :
    [32_OTHR= Turbidity () at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".