COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2     [ABND1= Total Copepods (#/m3)]      ( date set 1 )
    Column # 3     [ABDT1= Calanidae (#/m3)]      ( date set 1 )
    Column # 4     [ABDT1= Paracalanidae (#/m3)]      ( date set 1 )
    Column # 5     [ABDT1= Acartiidae (#/m3)]      ( date set 1 )
    Column # 6     [ABDT1= Oithonidae (#/m3)]      ( date set 1 )
    Column # 7     [ABDT2= Salpidae (#/m3)]      ( date set 1 )
    Column # 8     [ABDT2= Doliolidae (#/m3)]      ( date set 1 )

    Column # 9     [ DATE-MDY ]       Date Set = 2
    Column # 10     [CHLA= Chlorophyll (mg/m3)]      ( date set 2 )

    Column # 11     [ DATE-YMD ]       Date Set = 3
    Column # 12     [BIOM= Total Dry Mass (mg/m3)]      ( date set 3 )

    Column # 13     [ DATE-YMD ]       Date Set = 4
    Column # 14     [ABDT3= Total Diatoms (#/L)]      ( date set 4 )
    Column # 15     [ABDT3= Total Centric Diatoms (#/L)]      ( date set 4 )
    Column # 16     [ABDT3= Total Pennate Diatoms (#/L)]      ( date set 4 )
    Column # 17     [ABDT4= Total Dinoflagellates (#/L)]      ( date set 4 )
    Column # 18     [ABDT= Total Flagellates (#/L)]      ( date set 4 )
    Column # 19     [ABDT= Total Naked Flagellates (#/L)]      ( date set 4 )
    Column # 20     [ABDT= Total Ciliates (#/L)]      ( date set 4 )
    Column # 21     [ABDT= Total Coccolithophore (#/L)]      ( date set 4 )
    Column # 22     [ABDT= Total Cyanobacteria (#/L)]      ( date set 4 )

    Column # 23     [ DATE-YMD ]       Date Set = 5
    Column # 24     [PSAL= Salinity () at the surface]      ( date set 5 )
    Column # 25     [OTHR= Oxygen (uM) at the surface]      ( date set 5 )
    Column # 26     [LOTH= Silicate (uM) at the surface]      ( date set 5 )
    Column # 27     [LOTH= Nitrate (uM) at the surface]      ( date set 5 )
    Column # 28     [LOTH= Phosphate (uM) at the surface]      ( date set 5 )
    Column # 29     [OTHR= TCO2 (umol/kg) at the surface]      ( date set 5 )
    Column # 30     [OTHR= Total Alkalinity (umol/kg) at the surface]      ( date set 5 )

    Column # 31     [ DATE-YMD ]       Date Set = 6
    Column # 32     [TEMP= Temperature () at the surface]      ( date set 6 )
    Column # 33     [PSAL= Salinity () at the surface]      ( date set 6 )
    Column # 34     [CHLA= Fluorometric Chlorophyll () at the surface]      ( date set 6 )
    Column # 35     [OTHR= Turbidity () at the surface]      ( date set 6 )


DATA SORTED BY CATEGORY TYPES

    Total/non-zero Abundance Category
        Column # 2   [ ABND1= Total Copepods (#/m3) ]

    Abundance (with zeros) Category
        Column # 3   [ ABDT1= Calanidae (#/m3) ]
        Column # 4   [ ABDT1= Paracalanidae (#/m3) ]
        Column # 5   [ ABDT1= Acartiidae (#/m3) ]
        Column # 6   [ ABDT1= Oithonidae (#/m3) ]
        Column # 7   [ ABDT2= Salpidae (#/m3) ]
        Column # 8   [ ABDT2= Doliolidae (#/m3) ]
        Column # 14   [ ABDT3= Total Diatoms (#/L) ]
        Column # 15   [ ABDT3= Total Centric Diatoms (#/L) ]
        Column # 16   [ ABDT3= Total Pennate Diatoms (#/L) ]
        Column # 17   [ ABDT4= Total Dinoflagellates (#/L) ]
        Column # 18   [ ABDT= Total Flagellates (#/L) ]
        Column # 19   [ ABDT= Total Naked Flagellates (#/L) ]
        Column # 20   [ ABDT= Total Ciliates (#/L) ]
        Column # 21   [ ABDT= Total Coccolithophore (#/L) ]
        Column # 22   [ ABDT= Total Cyanobacteria (#/L) ]

    non-Log10 (linear) Miscellaenous Category
        Column # 25   [ OTHR= Oxygen (uM) at the surface ]
        Column # 29   [ OTHR= TCO2 (umol/kg) at the surface ]
        Column # 30   [ OTHR= Total Alkalinity (umol/kg) at the surface ]
        Column # 35   [ OTHR= Turbidity () at the surface ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature () at the surface ]

    Salinities Category
        Column # 24   [ PSAL= Salinity () at the surface ]
        Column # 33   [ PSAL= Salinity () at the surface ]

DATA SORTED BY GROUPING SETS:

    Category 2 Group # 1
        column # 2     [ ABND1= Total Copepods (#/m3) ]

    Category 8 Group # 1
        column # 3     [ ABDT1= Calanidae (#/m3) ]
        column # 4     [ ABDT1= Paracalanidae (#/m3) ]
        column # 5     [ ABDT1= Acartiidae (#/m3) ]
        column # 6     [ ABDT1= Oithonidae (#/m3) ]

    Category 8 Group # 2
        column # 7     [ ABDT2= Salpidae (#/m3) ]
        column # 8     [ ABDT2= Doliolidae (#/m3) ]

    Category 8 Group # 3
        column # 14     [ ABDT3= Total Diatoms (#/L) ]
        column # 15     [ ABDT3= Total Centric Diatoms (#/L) ]
        column # 16     [ ABDT3= Total Pennate Diatoms (#/L) ]

    Category 8 Group # 4
        column # 17     [ ABDT4= Total Dinoflagellates (#/L) ]



DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 2009 2015
DATES in Column 9 no problems detected 2009 2014
DATES in Column 11 no problems detected 2009 2015
DATES in Column 13 no problems detected 2009 2015
DATES in Column 23 no problems detected 2009 2015
DATES in Column 31 no problems detected 2010 2015

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 30
9 DATE-MDY DATE-MDY yes 1 12 1 30 2009 2014
11 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 30
13 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 30
23 DATE-YMD DATE-YMD yes 2009 2015 01 12 01 30
31 DATE-YMD DATE-YMD yes 2010 2015 01 12 01 30



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_ABND1= Total Copepods (#/m3) ]
no problems detected 57 574.652527 5783.84375 48
( 84 %)
48
( 84 %)
Column 3 :
[ 05_ABDT1= Calanidae (#/m3) ]
no problems detected 57 1.96459997 2208.23413 46
( 80 %)
46
( 80 %)
Column 4 :
[ 06_ABDT1= Paracalanidae (#/m3) ]
no problems detected 57 12.5734997 243.613098 48
( 84 %)
48
( 84 %)
Column 5 :
[ 07_ABDT1= Acartiidae (#/m3) ]
no problems detected 57 1.76820004 440.075195 48
( 84 %)
48
( 84 %)
Column 6 :
[ 08_ABDT1= Oithonidae (#/m3) ]
no problems detected 57 108.446701 1736.72510 48
( 84 %)
48
( 84 %)
Column 7 :
[ 09_ABDT2= Salpidae (#/m3) ]
no problems detected 57 3.92919993 86.4432983 8
( 14 %)
8
( 14 %)
Column 8 :
[ 10_ABDT2= Doliolidae (#/m3) ]
no problems detected 57 2.24530005 447.933594 26
( 45 %)
26
( 45 %)
Column 10 :
[11_CHLA= Chlorophyll (mg/m3) ]
There is/are 1 count WARNING(S)!

Some of your values are zero or "one".

Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 48 0.128999993 0.591000021 48
    ( 100 %)
    0
    ( 0 %)
    Column 12 :
    [ 12_BIOM= Total Dry Mass (mg/m3) ]
    no problems detected 57 4.51079988 96.7694016 57
    ( 100 %)
    57
    ( 100 %)
    Column 14 :
    [ 13_ABDT3= Total Diatoms (#/L) ]
    no problems detected 54 134.000000 69293.0000 54
    ( 100 %)
    54
    ( 100 %)
    Column 15 :
    [ 14_ABDT3= Total Centric Diatoms (#/L) ]
    no problems detected 54 99.0000000 67475.0000 54
    ( 100 %)
    54
    ( 100 %)
    Column 16 :
    [ 15_ABDT3= Total Pennate Diatoms (#/L) ]
    no problems detected 54 24.0000000 10882.0000 54
    ( 100 %)
    54
    ( 100 %)
    Column 17 :
    [ 16_ABDT4= Total Dinoflagellates (#/L) ]
    no problems detected 54 22.0000000 1108.00000 53
    ( 98 %)
    53
    ( 98 %)
    Column 18 :
    [17_ABDT= Total Flagellates (#/L) ]
    There is/are 2 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 54 9999999.00 0.00000000 0
    ( 0 %)
    0
    ( 0 %)
    Column 19 :
    [ 18_ABDT= Total Naked Flagellates (#/L) ]
    no problems detected 54 157.000000 29339.0000 50
    ( 92 %)
    50
    ( 92 %)
    Column 20 :
    [ 19_ABDT= Total Ciliates (#/L) ]
    no problems detected 54 22.0000000 2456.00000 31
    ( 57 %)
    31
    ( 57 %)
    Column 21 :
    [20_ABDT= Total Coccolithophore (#/L) ]
    There is/are 2 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 54 252.000000 252.000000 1
    ( 1 %)
    1
    ( 1 %)
    Column 22 :
    [21_ABDT= Total Cyanobacteria (#/L) ]
    There is/are 2 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 54 9999999.00 0.00000000 0
    ( 0 %)
    0
    ( 0 %)
    Column 24 :
    [ 22_PSAL= Salinity () at the surface ]
    no problems detected 64 35.0200005 35.8699989 64
    ( 100 %)
    64
    ( 100 %)
    Column 25 :
    [23_OTHR= Oxygen (uM) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 26 :
    [ 24_LOTH= Silicate (uM) at the surface ]
    no problems detected 60 0.300000012 2.59999990 60
    ( 100 %)
    54
    ( 90 %)
    Column 27 :
    [ 25_LOTH= Nitrate (uM) at the surface ]
    no problems detected 60 0.100000001 0.500000000 26
    ( 43 %)
    0
    ( 0 %)
    Column 28 :
    [ 26_LOTH= Phosphate (uM) at the surface ]
    no problems detected 60 9.99999978E-03 0.129999995 59
    ( 98 %)
    0
    ( 0 %)
    Column 29 :
    [27_OTHR= TCO2 (umol/kg) at the surface ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 60 9.99999978E-03 0.259999990 56
    ( 93 %)
    0
    ( 0 %)
    Column 30 :
    [ 28_OTHR= Total Alkalinity (umol/kg) at the surface ]
    no problems detected 42 1999.76001 2050.44995 42
    ( 100 %)
    42
    ( 100 %)
    Column 32 :
    [ 29_TEMP= Temperature () at the surface ]
    no problems detected 226 18.6835003 24.6236992 226
    ( 100 %)
    226
    ( 100 %)
    Column 33 :
    [ 30_PSAL= Salinity () at the surface ]
    no problems detected 226 35.0270996 35.8676987 226
    ( 100 %)
    226
    ( 100 %)
    Column 34 :
    [ 31_CHLA= Fluorometric Chlorophyll () at the surface ]
    no problems detected 191 6.99999975E-04 1.53069997 191
    ( 100 %)
    8
    ( 4 %)
    Column 35 :
    [32_OTHR= Turbidity () at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".